We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-polymer battery pack, matte finish, labelled 2900mAh 3.7V

Cameron Sino BA-0012A7 2900mAh Battery for CipherLAB 9300/9400/9600

SKU CH-Z02C-8AWP7

Replacement lithium-polymer battery delivers 2900 mAh at 3.7 V for CipherLAB 9300, 9400 and 9600 series scanners

  • Specifications65.30 x 37.50 x 16.70
  • Typelithium_polymer
  • Battery Pack65.30 x 37.50 x 16.70
  • Battery Typelithium_polymer
  • Battery Capacity2900.00 milliamp_hours
  • Battery Voltage3.70 volts
  • Compatible with CipherLAB 9300, 9400, 9600 and CPT models
  • 2900mAh capacity delivers 10.73Wh for extended scanner runtime
  • Lithium polymer cell measures 65.30 x 37.50 x 16.70mm and weighs 65.2g
  • Built-in protection guards against overcharge, over-discharge, over-voltage and short circuit
  • Certified to ISO9001, RoHS and CE standards for safety and quality

Replacement battery for CipherLAB scanners

This Cameron Sino lithium-polymer pack replaces the original BA-0012A7 cell in CipherLAB 9300, 9400 and 9600 series barcode scanners. It delivers 2900 mAh at 3.7 V and matches the factory dimensions of 65.30 x 37.50 x 16.70 mm. The unit is new and carries ISO9001, RoHS and CE certification.

Sustained shift performance

Rated at 10.73 Wh, the cell supports extended scanning sessions without the voltage sag seen in aged original packs. The integrated protection circuit guards against over-charge, over-discharge, over-voltage and short-circuit events during continuous operation. Capacity reaches its full rating after two or three complete charge cycles.

Straightforward swap with a caution

The pack uses the same connector and form factor as the factory battery, so installation follows the usual battery-door procedure. Verifying the device model and original part number before purchase avoids fitment issues. Using a low-quality third-party charger can shorten service life, so the original or an approved supply is recommended.

Highlights

  • Compatible with CipherLAB 9300, 9400, 9600 and CPT models
  • 2900mAh capacity delivers 10.73Wh for extended scanner runtime
  • Lithium polymer cell measures 65.30 x 37.50 x 16.70mm and weighs 65.2g
  • Built-in protection guards against overcharge, over-discharge, over-voltage and short circuit
  • Certified to ISO9001, RoHS and CE standards for safety and quality

Specifications

BrandCameron Sino
Model9300, 9400, 9600, CPT 9300, CPT 9400, CPT 9600
Part NumberBA-0012A7
Specifications65.30 x 37.50 x 16.70
Typelithium_polymer
Battery Pack65.30 x 37.50 x 16.70
Battery Typelithium_polymer
Battery Capacity2900.00 milliamp_hours
Battery Voltage3.70 volts

Questions about this item

Does the 3.7 V lithium-polymer pack run hot or draw extra power during a full shift?

The 2900 mAh cell is rated at 3.7 V and 10.73 Wh; it has built-in over-charge, over-discharge and short-circuit protection, so heat and power draw stay within normal limits for the scanner.

What must I already own to use this BA-0012A7 battery?

You need a CipherLAB 9300, 9400 or 9600 series barcode scanner (including CPT models) that takes the original BA-0012A7 pack, plus the scanner's standard charger.

Will the 65.30 × 37.50 × 16.70 mm replacement fit and work alongside the original charger and dock I already use?

Yes — the pack matches the factory dimensions and connector, so it slots into the scanner and charges on the existing dock or adapter without modification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.