Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00997563BTC
In stock
cameron sino Autel MaxiBAS BT608 TB2022 2700mAh 7.7V standard battery
Replacement lithium-polymer battery for Autel MaxiBAS BT608 diagnostic scanner, 2700 mAh at 7.7 V with built-in protection circuits
- Specifications81.00 x 54.50 x 8.50
- Typelithium_polymer
- Battery Pack81.00 x 54.50 x 8.50
- Battery Typelithium_polymer
- Battery Capacity2700.00 milliamp_hours
- Battery Voltage7.70 volts_of_alternating_current
- Replacement battery fits Autel MaxiBAS BT608 scanner
- 2700 mAh capacity delivers 20.79 Wh runtime
- 7 V lithium-polymer chemistry matches original spec
- Certified to ISO 9001, RoHS and CE standards
- Compact 81.00 x 54.50 x 8.50 mm form factor
Direct replacement for Autel MaxiBAS BT608
This lithium-polymer battery matches the original TB2022 specification at 2700mAh and 7.7V. It is built to the same 81.00 x 54.50 x 8.50mm form factor and weighs 83.0g. The pack includes a fully decoded chip so the scanner recognises it immediately. Certified to ISO9001, RoHS and CE standards.
Steady output during long diagnostic sessions
The 20.79Wh capacity supports extended use without the voltage sag seen in lower-grade cells. Integrated protection guards against overcharge, over-discharge, over-voltage and short circuit, keeping output stable throughout a full workday. Performance reaches its peak after two or three complete charge cycles.
Verify the scanner model and original part number
Confirm the device is a MaxiBAS BT608 and that the existing battery carries part number TB2022 before ordering. Ensure the connector aligns correctly during installation. Avoid low-quality third-party chargers, as they can reduce the pack's service life.
Highlights
- Replacement battery fits Autel MaxiBAS BT608 scanner
- 2700 mAh capacity delivers 20.79 Wh runtime
- 7 V lithium-polymer chemistry matches original spec
- Certified to ISO 9001, RoHS and CE standards
- Compact 81.00 x 54.50 x 8.50 mm form factor
Specifications
| Brand | cameron sino |
|---|---|
| Model | Autel MaxiBAS BT608 |
| Part Number | Autel TB2022 |
| Specifications | 81.00 x 54.50 x 8.50 |
| Type | lithium_polymer |
| Battery Pack | 81.00 x 54.50 x 8.50 |
| Battery Type | lithium_polymer |
| Battery Capacity | 2700.00 milliamp_hours |
| Battery Voltage | 7.70 volts_of_alternating_current |
Questions about this item
Does the 7.7 V lithium-polymer pack run warm during a full day of scanning?
The 2700 mAh cell is designed to match the original BT608 specifications, so heat output stays comparable to the factory battery under normal diagnostic use.
What must I already own for this TB2022 replacement to work?
You need an Autel MaxiBAS BT608 scanner that originally used part number TB2022; the battery slots directly into that device.
Will the 81.00 x 54.50 x 8.50 mm pack fit alongside the older BT608 hardware I still use?
Yes, the dimensions and connector match the original TB2022 spec, so it installs in the same compartment without modification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
