We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cameron Sino AHB523450 1000mAh 3.7V Li-Po Battery

SKU CH-Y7VM-YZCNZ

Replacement lithium-polymer cell rated 1000 mAh at 3.7 V for HelloBaby HB24, HB31, HB6231, HB6233, HB6339, HB66 and HB66 Pro monitors

  • Specifications51.00 x 34.50 x 5.00
  • Typelithium_polymer
  • Battery Pack51.00 x 34.50 x 5.00
  • Battery Typelithium_polymer
  • Battery Capacity1000 milliamp_hours
  • Battery Voltage3.7 volts
  • 1000 mAh capacity powers HelloBaby monitors longer
  • 7 V lithium-polymer cell matches original voltage
  • 00 x 34.50 x 5.00 mm size fits HB24, HB31, HB6231, HB6233, HB6339, HB66, HB66 Pro
  • ISO 9001 certified production ensures consistent quality
  • New fully decoded chip works like the original battery

Compatible HelloBaby Baby Monitors

This lithium-polymer replacement battery fits HelloBaby HB24, HB31, HB6231, HB6233, HB6339, HB66 and HB66 Pro monitors. It matches the original AHB523450 part number and delivers 1000mAh at 3.7V. The pack measures 51.00 x 34.50 x 5.00 mm and includes a fully decoded chip for plug-and-play operation.

Verify Model And Connector Before Ordering

Check the model number printed on your monitor and the part number on the original battery to confirm they match the listed HelloBaby models. Ensure the connector on your existing pack aligns with this replacement before installation. A new cell reaches optimum capacity after two or three full charge cycles.

Slim Polymer Pack With Built-In Protection

The thin 5.00 mm profile slides into the monitor’s battery compartment without forcing the casing. Integrated circuitry guards against overcharge, over-discharge, over-voltage and short circuits for safer daily use. Shock-absorbing foam in the packaging protects the cell during transit.

Highlights

  • 1000 mAh capacity powers HelloBaby monitors longer
  • 7 V lithium-polymer cell matches original voltage
  • 00 x 34.50 x 5.00 mm size fits HB24, HB31, HB6231, HB6233, HB6339, HB66, HB66 Pro
  • ISO 9001 certified production ensures consistent quality
  • New fully decoded chip works like the original battery

Specifications

BrandCameron Sino
ModelHB31 Monitor, HB6231 Monitor, HB6233 Monitor, HB66 Monitor, HB66 Pro Monitor
Part NumberAHB523450
Specifications51.00 x 34.50 x 5.00
Typelithium_polymer
Battery Pack51.00 x 34.50 x 5.00
Battery Typelithium_polymer
Battery Capacity1000 milliamp_hours
Battery Voltage3.7 volts

Questions about this item

What comes in the box and is anything else needed to install the AHB523450 battery?

The package contains one 1000mAh 3.7V lithium-polymer cell with pre-attached connector and protective foam; no extra parts or tools are required for installation.

Which HelloBaby monitor models does the AHB523450 1000mAh battery fit?

It replaces the original AHB523450 cell in HB24, HB31, HB6231, HB6233, HB6339, HB66 and HB66 Pro monitors.

How long will the 1000mAh 3.7V capacity run a HelloBaby HB66 Pro monitor between charges?

The 3.7Wh rating matches the factory cell, so runtime equals the original battery life — typically several hours of continuous monitoring depending on screen brightness and audio settings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.