We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-polymer battery pack, matte finish, 81 by 40 by 10 millimetres

Cameron Sino AHB104180 4800mAh 3.7V battery

SKU CH-CAQM-WQ7PH

Replacement lithium-polymer battery delivering 4800 mAh at 3.7 V for Anbernic RG Cube series handhelds

  • Specifications81.00 x 40.30 x 10.00
  • Typelithium_polymer
  • Battery Pack81.00 x 40.30 x 10.00
  • Battery Typelithium_polymer
  • Battery Capacity4800.00 milliamp_hours
  • Battery Voltage3.70 volts
  • Replacement battery for Anbernic RG Cube series
  • 4800mAh capacity provides extended handheld play time
  • 7V lithium-polymer cell matches original specifications
  • Certified to ISO9001, RoHS and CE safety standards
  • Fully decoded chip works like the original battery

Direct replacement for Anbernic RG Cube series

This lithium-polymer battery matches the original 4800mAh capacity and 3.7V voltage for the Anbernic RG Cube, RG Cube Retro and RG Cube Video. It carries ISO9001, RoHS and CE certification and includes a fully decoded chip so the handheld recognises it immediately. The pack measures 81.00 x 40.30 x 10.00 mm and delivers 17.76 Wh of energy.

Simple drop-in installation with common pitfalls

Installation videos are widely available and the connector plugs straight into the board, but the ribbon must be seated squarely or the console will not power on. A low-quality third-party charger can degrade the cells, so use the original supply or an equivalent 3.7 V source. The new cell reaches full capacity after two or three complete charge and discharge cycles.

Steady output during long play sessions

The integrated protection circuit guards against overcharge, over-discharge, over-voltage and short-circuit events, keeping voltage stable during extended gaming. Thermal margins stay consistent because the pack is built to the same dimensions and chemistry as the factory unit. Sustained draw does not trigger premature shutdown thanks to the decoded chip’s accurate fuel-gauge reporting.

Highlights

  • Replacement battery for Anbernic RG Cube series
  • 4800mAh capacity provides extended handheld play time
  • 7V lithium-polymer cell matches original specifications
  • Certified to ISO9001, RoHS and CE safety standards
  • Fully decoded chip works like the original battery

Specifications

Brandcameron sino
ModelAnbernic RG Cube Video RG Cube Retro RG Cube
Part NumberAnbernic AHB104180
Specifications81.00 x 40.30 x 10.00
Typelithium_polymer
Battery Pack81.00 x 40.30 x 10.00
Battery Typelithium_polymer
Battery Capacity4800.00 milliamp_hours
Battery Voltage3.70 volts

Questions about this item

How can I verify the battery is working correctly after installing it in my Anbernic RG Cube?

The device should power on and report a full charge near 4800mAh. After two or three complete charge and discharge cycles the runtime will stabilise at the rated 17.76Wh capacity.

What comes in the package and is any extra hardware needed?

One lithium-polymer cell measuring 81.00 x 40.30 x 10.00 mm with a pre-fitted connector is included. No additional parts or tools are required for installation.

Which version of this battery matches my Anbernic RG Cube Retro?

The part number AHB104180 is specified for the RG Cube, RG Cube Retro and RG Cube Video. Confirm the original battery carries the same part number before ordering.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.