Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00989969BTC
In stock
Cameron Sino A2000 BIS Monitoring Battery 2000mAh 7.2V Ni-MH
Replacement nickel-zinc pack for System A2000 BIS and BIS View monitors, 2000 mAh at 7.2 V
- Specifications1
- Typenickel_zinc
- Battery Pack1
- Battery Typenickel_zinc
- Battery Capacity2000.00 milliamp_hours
- Battery Voltage7.20 volts
- Reliable power for A2000 BIS monitoring with 2000mAh 7.2V Ni-MH capacity
- Direct replacement for System 195-0019 AS30077 BATT110290 CSC07129 OM11230 part numbers
- Certified safety with ISO9001 RoHS and CE compliance for medical environments
- Fully decoded chip ensures original-equivalent communication and performance
- Compact 100.50 x 46.50 x 18.50mm design fits securely in monitoring device
Direct replacement for System monitoring units
This Cameron Sino battery replaces the original power pack in System A2000 BIS and BIS View monitoring devices. It matches the 7.2 V, 2000 mAh nickel-zinc specification and fits the 100.50 x 46.50 x 18.50 mm compartment. The decoded chip communicates with the host exactly like the factory cell. Technicians servicing clinical or industrial monitors use this pack to restore mobile operation.
Upgrades ageing Ni-MH packs that no longer hold
The jump is worth it when the original battery drops below useful runtime or shows swelling. Nickel-zinc chemistry delivers the same voltage window while offering a flatter discharge curve, so the monitor reports remaining capacity more accurately. No firmware update or hardware modification is required; the connector mates with the existing socket. Units still running on depleted cells gain full portable runtime again.
Sustained discharge stays stable through a full
Under continuous load the voltage holds steady until the final minutes, avoiding the early sag that triggers premature low-battery alerts. The integrated protection circuit guards against over-charge, over-discharge, over-voltage and short-circuit events during long sessions. After two to three full cycles the pack reaches its rated 14.40 Wh capacity. Storage below 60 °C preserves cycle life between uses.
Highlights
- Reliable power for A2000 BIS monitoring with 2000mAh 7.2V Ni-MH capacity
- Direct replacement for System 195-0019 AS30077 BATT110290 CSC07129 OM11230 part numbers
- Certified safety with ISO9001 RoHS and CE compliance for medical environments
- Fully decoded chip ensures original-equivalent communication and performance
- Compact 100.50 x 46.50 x 18.50mm design fits securely in monitoring device
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | A2000 BIS Monitoring, A2000 Monitor, BIS View Monitoring, Monitor A2000 |
| Part Number | 195-0019, AS30077, B11230, BATT110290, CSC07129, OM11230 |
| Specifications | 1 |
| Type | nickel_zinc |
| Battery Pack | 1 |
| Battery Type | nickel_zinc |
| Battery Capacity | 2000.00 milliamp_hours |
| Battery Voltage | 7.20 volts |
Questions about this item
Will the 100.50 x 46.50 x 18.50 mm pack fit the battery compartment of my System 195-0019 monitor?
The pack measures 100.50 x 46.50 x 18.50 mm and is listed as a direct replacement for part numbers 195-0019, AS30077, BATT110290, CSC07129 and OM11230, so it matches the original compartment.
What is the installation step users most often miss when fitting this Ni-MH pack?
Ensure the connector is fully seated and clicks into place; a loose connector prevents the monitor from recognising the new pack.
How should I maintain the 2000mAh nickel-zinc cells for maximum service life?
Run two or three full charge and discharge cycles when new, avoid storing above 60 °C, and always use the original charger rather than a low-quality third-party adapter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
