We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack, dark casing, connector visible

Cameron Sino 950mAh 3.7V Battery for 3M C1060 XT-1

SKU CH-E8F0-TN329

A 950 mAh 3.7 V lithium-ion replacement battery for 3M C1060, XT-1 and compatible wireless headsets, with built-in protection circuits and a fully decoded chip

  • Specifications55.30 x 40.80 x 12.30
  • Battery Pack55.30 x 40.80 x 12.30
  • Battery Capacity950 milliamp_hours
  • Battery Voltage3.7 volts
  • Ready for 3M C1060, XT-1 and RF1060 headsets
  • 950 mAh capacity gives long talk time
  • 7 V lithium-ion matches original spec
  • 30 × 40.80 × 12.30 mm fits battery bay
  • Built-in protection against overcharge and short circuit

Compatible Headset Battery

The Cameron Sino replacement cell fits 3M C1060, C1060 Wireless Intercom, RF1060, T-1, T-1 drive-thru headsets and XT-1 models. It matches original part numbers BAT1060, CP-SN3M and XT-1 with a 950 mAh lithium-ion pack rated at 3.7 V. The new fully decoded chip works like the original battery. Buyers who need a different voltage or a higher capacity cell cannot use this product.

Sustained Operation

The pack delivers 3.52 Wh at 3.70 V and includes overcharge, over-discharge, over-voltage and short-circuit protection circuits. A new battery reaches its best performance after two or three complete charge and discharge cycles. Users who run headsets continuously for full shifts should expect gradual capacity fade over many months of daily cycling.

Physical Limits

The battery measures 55.30 x 40.80 x 12.30 mm and weighs 55 g, so it only fits compartments designed for those exact dimensions. The connector must be properly seated during installation or the headset will not power on. Do not expose the cell to temperatures above 60 °C or 140 °F, and never disassemble or dispose of it in fire or water.

Highlights

  • Ready for 3M C1060, XT-1 and RF1060 headsets
  • 950 mAh capacity gives long talk time
  • 7 V lithium-ion matches original spec
  • 30 × 40.80 × 12.30 mm fits battery bay
  • Built-in protection against overcharge and short circuit

Specifications

BrandCS Cameron Sino
ModelWireless Headset
Part Number4894128031253
Specifications55.30 x 40.80 x 12.30
Battery Pack55.30 x 40.80 x 12.30
Battery Capacity950 milliamp_hours
Battery Voltage3.7 volts

Questions about this item

Does the 3.7 V lithium-ion cell generate noticeable heat during a full 12-hour drive-thru shift?

The 950 mAh pack is designed to the original 3M specification and includes over-voltage, short-circuit and thermal protection, so it runs at normal operating temperature during extended use.

What must I already own to install this replacement pack in my headset?

You need the 3M C1060, RF1060, T-1 or XT-1 headset itself and a small screwdriver to open the battery compartment; the pack ships with a pre-fitted connector that matches the original BAT1060/CP-SN3M pin-out.

Will the 55.30 × 40.80 × 12.30 mm dimensions fit the battery bay of my older 3M C1060 intercom?

Yes, the pack replicates the exact OEM footprint and 55 g weight, so it seats securely in every listed model including the legacy C1060 and RF1060 units.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.