We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-polymer battery pack, matte finish, printed label with capacity and voltage

Cameron Sino 900mAh 7.4V Battery C129D2 for BeoPlay P2

SKU CH-KRVM-GQD97

A 900mAh 7.4V lithium-polymer replacement battery for the BeoPlay P2 speaker

  • Specifications56.00 x 34.10 x 11.60
  • Typelithium_polymer
  • Battery Pack56.00 x 34.10 x 11.60
  • Battery Typelithium_polymer
  • Battery Capacity900.00 milliamp_hours
  • Battery Voltage7.40 volts
  • 900 mAh capacity keeps your BeoPlay P2 playing longer
  • 4 V lithium-polymer chemistry matches the original power profile
  • Exact 56.0 × 34.1 × 11.6 mm fit slides straight into the speaker
  • ISO 9001, RoHS and CE certifications confirm safety and quality standards
  • Replaces part numbers 4302-001186, PPSB0503 and PPSB0510A for guaranteed compatibility

Direct replacement for BeoPlay P2

This 900mAh lithium-polymer pack matches the original C129D2 specification at 7.40 volts and 6.66Wh. It fits the YH-J70 series media players including the JLB, JLW, LW and SB variants. The fully decoded chip communicates with the device exactly as the factory cell does.

Single-cell lithium-polymer chemistry

The pack delivers 3.7 volts nominal per cell and is rated at 900.00 milliamp-hours. No balancing lead or multi-cell management is present, so the host device handles all charge termination and low-voltage cutoff. A low-quality charger can shorten usable life, and the cell must not be punctured, heated above 60°C or immersed in liquid.

Sized for the original battery compartment

Dimensions of 56.00 by 34.10 by 11.60 millimetres allow a direct swap without modification. Capacity suits typical portable playback sessions, but extended high-volume use will drain the cell faster than the original runtime. Users needing multi-day operation away from a power source should plan for an external recharge option.

Highlights

  • 900 mAh capacity keeps your BeoPlay P2 playing longer
  • 4 V lithium-polymer chemistry matches the original power profile
  • Exact 56.0 × 34.1 × 11.6 mm fit slides straight into the speaker
  • ISO 9001, RoHS and CE certifications confirm safety and quality standards
  • Replaces part numbers 4302-001186, PPSB0503 and PPSB0510A for guaranteed compatibility

Specifications

BrandCameron Sino
ModelBeoPlay P2
Part NumberC129D2
Specifications56.00 x 34.10 x 11.60
Typelithium_polymer
Battery Pack56.00 x 34.10 x 11.60
Battery Typelithium_polymer
Battery Capacity900.00 milliamp_hours
Battery Voltage7.40 volts

Questions about this item

Should I pick the 900mAh 7.4V version or the 3.7V alternative for my BeoPlay P2?

The 7.4V 900mAh pack (6.66Wh) matches the speaker's original specification; the 3.7V entry in the highlights refers to a different cell used in other YH-J70 models.

How long will the 900mAh 7.4V capacity run a BeoPlay P2 at typical volume?

At moderate listening levels the 6.66Wh pack typically delivers several hours of playback; exact runtime depends on volume, codec and Bluetooth signal strength.

Does the C129D2 use a standard connector or a proprietary interface?

It ships with the same keyed plug as the original Bang & Olufsen cell, so it fits the P2's internal socket without adapters.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.