We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack, dark casing, wire connector visible

Cameron Sino 70C0003KIT 2500mAh 7.50Wh battery

SKU CH-0RPJ-NY3C5

Replacement lithium-ion battery for Cattron Theimeg crane remotes, 2500 mAh and 7.50 Wh with built-in protection circuits

  • Specifications59.50 x 28.70 x 15.10
  • Battery Pack59.50 x 28.70 x 15.10
  • Battery Capacity2500 milliamp_hours
  • Direct replacement for Cattron Theimeg 70C0003KIT remote controls
  • 2500 mAh capacity delivers 7.50 Wh of runtime
  • Compact 59.50 x 28.70 x 15.10 mm form fits original battery bay
  • Built-in protection guards against overcharge, over-discharge and short circuits
  • ISO9001, RoHS and CE certified for safety compliance

Replacement Battery for Cattron Theimeg Remotes

The Cameron Sino 70C0003KIT is a rechargeable lithium-ion pack built to replace the original Cattron Theimeg 70C0003KIT and 70C-0003KIT-C batteries. It matches the factory part number 60C-0060A and is certified to ISO9001, RoHS and CE standards. Operators who maintain crane remote controls can swap the pack without soldering or firmware changes.

Drop-in Fit and Connector Compatibility

The pack measures 59.50 x 28.70 x 15.10 mm and weighs 53.0 g, matching the original housing so no case modification is required. A fully decoded chip communicates with the remote exactly like the stock unit, and the existing connector plugs straight in. The package includes protective foam for safe handling during installation.

2500 mAh Capacity for Extended Shifts

At 2500 mAh and 7.50 Wh the battery delivers long run-times between charges for typical crane-remote duty cycles. The 3.0 V nominal voltage supports the radio link without voltage sag under load. It is not suited for devices that need higher voltage or larger capacity packs, and it cannot be used in non-Cattron equipment.

Highlights

  • Direct replacement for Cattron Theimeg 70C0003KIT remote controls
  • 2500 mAh capacity delivers 7.50 Wh of runtime
  • Compact 59.50 x 28.70 x 15.10 mm form fits original battery bay
  • Built-in protection guards against overcharge, over-discharge and short circuits
  • ISO9001, RoHS and CE certified for safety compliance

Specifications

BrandCameron Sino
Model70C0003KIT, 70C-0003KIT-C
Part Number60C-0060A
Specifications59.50 x 28.70 x 15.10
Battery Pack59.50 x 28.70 x 15.10
Battery Capacity2500 milliamp_hours

Questions about this item

How long will the 2500mAh capacity last before voltage drops under continuous crane remote use?

The 2500mAh lithium-ion cell delivers 7.50Wh at 3.0V; actual runtime depends on the remote's current draw, but the pack is rated to maintain output until the protection circuit cuts off at the safe lower limit.

Does the pack run hot or make noise during all-day operation?

No moving parts or active cooling are present; the sealed 53.0g lithium-ion unit produces no audible noise and only slight warmth under normal load, staying well within the 60°C storage ceiling.

What connector or charger must I already own to use this replacement?

You need the original Cattron Theimeg remote that accepts the 59.50 x 28.70 x 15.10mm pack with its built-in decoded chip; charge only with the manufacturer-approved adapter to avoid shortening cell life.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.