Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00990064BTC
In stock
Cameron Sino 700mAh 9.0V Battery for Abbott AN-500 i-STAT 1 300-G 06F23-55
Nickel-zinc replacement battery delivers 700 mAh at 9.0 V for Abbott AN-500, i-STAT 1 and i-STAT 300-G analysers
- Specifications52.42 x 38.10 x 30.00
- Typenickel_zinc
- Battery Pack52.42 x 38.10 x 30.00
- Battery Typenickel_zinc
- Battery Capacity700.00 milliamp_hours
- Battery Voltage9.00 volts
- 700 mAh capacity powers Abbott i-STAT devices reliably
- 0 V nickel-zinc chemistry matches original specifications
- 42 × 38.10 × 30.00 mm form factor fits AN-500 and 300-G
- ISO 9001, RoHS and CE certified for medical-grade quality
- Built-in protection guards against overcharge, over-discharge and short circuits
Compatible Replacement Battery
This nickel-zinc battery replaces the original power source in Abbott AN-500, i-STAT 1 and i-STAT 300-G medical devices. It matches the Abbott 06F23-55 part number and delivers 700mAh capacity at 9.0 volts for direct compatibility.
Upgrade From Worn Original Cells
The jump is worth it when the factory-fitted pack no longer holds a full charge or shows reduced runtime during patient testing. A fresh 6.30 Wh cell restores the specified voltage profile and eliminates unexpected shutdowns in clinical use.
Capacity And Runtime Headroom
The 700mAh rating supports typical hand-held analyser workloads through a standard shift before recharging is needed. Runtime shortens under continuous high-drain assays or if the device is left in standby beyond the recommended cycle interval.
Highlights
- 700 mAh capacity powers Abbott i-STAT devices reliably
- 0 V nickel-zinc chemistry matches original specifications
- 42 × 38.10 × 30.00 mm form factor fits AN-500 and 300-G
- ISO 9001, RoHS and CE certified for medical-grade quality
- Built-in protection guards against overcharge, over-discharge and short circuits
Specifications
| Brand | cameron sino |
|---|---|
| Model | Abbott i-STAT 1 i-STAT 300-G AN-500 |
| Part Number | Abbott 06F23-55 |
| Specifications | 52.42 x 38.10 x 30.00 |
| Type | nickel_zinc |
| Battery Pack | 52.42 x 38.10 x 30.00 |
| Battery Type | nickel_zinc |
| Battery Capacity | 700.00 milliamp_hours |
| Battery Voltage | 9.00 volts |
Questions about this item
Will the 52.42 x 38.10 x 30.00 mm nickel-zinc pack fit my Abbott i-STAT 1 battery compartment?
Yes, those exact dimensions match the original Abbott 06F23-55 pack used in the AN-500, i-STAT 1 and i-STAT 300-G analysers.
What is the installation step users most often miss when replacing the 9.0 V 700 mAh pack?
Fully seating the connector so the decoded chip communicates with the analyser; a loose plug prevents the device from recognising the new battery.
How many charge cycles should I expect before the nickel-zinc 6.30 Wh cell needs replacement?
The chemistry typically delivers several hundred full cycles; after 2–3 initial conditioning cycles capacity stabilises, then plan replacement when run-time drops below clinical requirements.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
