Ultimaxx
Ultimaxx NP-W126 Battery Kit 1400 mAh x2 32 GB SD Card Case Cloth
$21.99
0.00026544BTC
In stock
Cameron Sino 680mAh Li-ion Camera Battery CGA-S002/DMW-BM7
680 mAh lithium-ion replacement battery for select Panasonic Lumix models including DMC-FZ1 and FZ5 series
- Typelithium_ion
- Pack44.16 x 35.60 x 12.50
- Chemicallithium_ion
- Capacity680.00 milliamp_hours
- 680 mAh capacity extends shooting time
- 8 V lithium-ion chemistry matches original specs
- Fully decoded chip works like the original battery
- Fits Panasonic Lumix DMC-FZ1, FZ5, FZ10, FZ15, FZ20 series
- Built-in overcharge, over-discharge and short-circuit protection
Direct replacement for Lumix FZ cameras
The Cameron Sino 680mAh lithium-ion cell replaces Panasonic part numbers CGA-S002, CGR-S002E and DMW-BM7. It fits models from the original DMC-FZ1 through the FZ20 series, including FZ5, FZ10 and FZ15 variants. The 4.8 V pack uses a fully decoded chip so the camera reads remaining capacity exactly like the original battery.
680mAh capacity for everyday shooting
At 680mAh the pack delivers enough power for a typical day of stills and short video clips on supported Lumix models. Heavy flash use, long video sessions or cold weather will drain the cell faster, so a second battery is advisable for extended outings. The lithium-ion chemistry has no memory effect and recharges in the camera or a compatible external charger.
Compact 44.16 × 35.60 × 12.50 mm form factor
The slim 31.3 g pack slides into the existing battery compartment without adapters or modifications. Built-in over-charge, over-discharge, over-voltage and short-circuit protection guards both the cell and the camera. No extra cables or mounts are required; the battery simply replaces the OEM unit and frees the photographer to carry a spare in any pocket or bag.
Highlights
- 680 mAh capacity extends shooting time
- 8 V lithium-ion chemistry matches original specs
- Fully decoded chip works like the original battery
- Fits Panasonic Lumix DMC-FZ1, FZ5, FZ10, FZ15, FZ20 series
- Built-in overcharge, over-discharge and short-circuit protection
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DMC-FZ10, DMC-FZ10EB, DMC-FZ10EG-K, DMC-FZ10EG-S, DMC-FZ10GN, DMC-FZ15, DMC-FZ15K, DMC-FZ15P, DMC-FZ1A, DMC-FZ1A-K, DMC-FZ1A-S, DMC-FZ1B, DMC-FZ1PP, DMC-FZ2, DMC-FZ20, DMC-FZ20BB, DMC-FZ20E, DMC-FZ20EG-K, DMC-FZ20EG-S, DMC-FZ20K, DMC-FZ20PP, DMC-FZ20S, DMC-FZ2A-S, DMC-FZ2E, DMC-FZ2PP, DMC-FZ3, DMC-FZ3B, DMC-FZ3EG-S, DMC-FZ3GN, DMC-FZ3PP, DMC-FZ4, DMC-FZ4EG-S, DMC-FZ4PP, DMC-FZ4S, DMC-FZ5, DMC-FZ5EB, DMC-FZ5EG, DMC-FZ5EG-K, DMC-FZ5EG-S, DMC-FZ5GK, DMC-FZ5GN, DMC-FZ5K, DMC-FZ5PP, DMC-FZ5S, Lumix DMC-FZ1 |
| Part Number | CGA-S002, CGA-S002A, CGA-S002A/1B, CGA-S002E, CGA-S002E/1B, CGR-S002, CGR-S002E, DMW-BM7 |
| Type | lithium_ion |
| Pack | 44.16 x 35.60 x 12.50 |
| Chemical | lithium_ion |
| Capacity | 680.00 milliamp_hours |
Questions about this item
Will the 44.16 x 35.60 x 12.50 mm pack fit the same compartment as my original DMW-BM7?
Yes, the replacement matches the original DMW-BM7 dimensions of 44.16 x 35.60 x 12.50 mm and 31.3 g, so it seats in the existing battery bay without modification.
How can I verify the new battery is recognised and charging correctly after I install it?
The fully decoded chip reports the same 4.8 V / 680 mAh profile as the OEM pack; the camera's battery-info screen will show normal capacity and the charge indicator will cycle through its usual stages.
Does the box include a charger or only the single CGA-S002 cell?
Only one 680 mAh lithium-ion cell is supplied; no charger, cable or additional AAA batteries are included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
