We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-polymer battery pack, dark casing, 68.30 by 52.60 by 46.00 mm

Cameron Sino 6400mAh 6.0V Li-Polymer Battery for ATS Electro-Luber 250/500 Ultimate MD500BATPACK-P

SKU CH-Y9GJ-RV2H6

Replacement lithium-polymer pack delivers 6400mAh at 6.0V for ATS Electro-Luber 250 and 500 Ultimate models

  • Specifications68.30 x 52.60 x 46.00
  • Typelithium_polymer
  • Battery Pack68.30 x 52.60 x 46.00
  • Battery Typelithium_polymer
  • Battery Capacity6400 milliamp_hours
  • Battery Voltage6 volts
  • 6400 mAh capacity powers ATS Electro-Luber 250 and 500 Ultimate models for extended lubrication cycles
  • 0 V lithium-polymer chemistry matches original MD500BATPACK-P specifications for drop-in compatibility
  • ISO 9001 certified production with over-charge, over-discharge and short-circuit protection safeguards equipment
  • Compact 68.30 × 52.60 × 46.00 mm pack fits existing battery compartment without modification
  • Fully decoded chip enables plug-and-play installation guided by widely available online videos

Replacement Battery for ATS Electro-Luber 250/500

This 6.0 V lithium-polymer pack replaces the original MD500BATPACK-P in ATS Electro-Luber 250 Ultimate and 500 Ultimate lubrication units. It delivers 6400 mAh capacity and 38.4 Wh energy rating in a 68.30 × 52.60 × 46.00 mm form factor. The integrated protection circuit guards against overcharge, over-discharge, over-voltage and short-circuit conditions. A fully decoded chip ensures communication with the host device matches the factory battery.

Maintenance teams standardising on ATS Ultimate

Technicians who service fleets of 250 Ultimate or 500 Ultimate lubers can swap cells without adapter cables or firmware changes. The pack is certified to ISO 9001 and ships with shock-absorbing foam for transit protection. Buyers needing a different voltage, a higher capacity or a form factor for non-ATS equipment should look at other listings. The connector layout matches only the stated part number.

6400 mAh capacity for extended lubrication cycles

At 6.0 V the 38.4 Wh rating supports multiple dispensing cycles between charges, reducing downtime on remote or outdoor installations. Runtime scales with the lubricator’s programmed discharge rate and ambient temperature. The battery reaches full performance after two to three complete charge-discharge cycles. Units requiring longer uninterrupted operation or a different cell chemistry will need an alternative power solution.

Highlights

  • 6400 mAh capacity powers ATS Electro-Luber 250 and 500 Ultimate models for extended lubrication cycles
  • 0 V lithium-polymer chemistry matches original MD500BATPACK-P specifications for drop-in compatibility
  • ISO 9001 certified production with over-charge, over-discharge and short-circuit protection safeguards equipment
  • Compact 68.30 × 52.60 × 46.00 mm pack fits existing battery compartment without modification
  • Fully decoded chip enables plug-and-play installation guided by widely available online videos

Specifications

Brandcameron sino
ModelATS Electro-Lube 250 Ultimate luber 500 Ultimate luber
Part NumberATS Electro-Lube MD500BATPACK-P
Specifications68.30 x 52.60 x 46.00
Typelithium_polymer
Battery Pack68.30 x 52.60 x 46.00
Battery Typelithium_polymer
Battery Capacity6400 milliamp_hours
Battery Voltage6 volts

Questions about this item

What ATS Electro-Luber models does this 6400mAh 6.0V Li-Polymer pack replace?

It replaces the original battery in the ATS Electro-Luber 250 Ultimate and 500 Ultimate units, matching part number MD500BATPACK-P.

Will the existing charger in my ATS Electro-Luber 250 Ultimate charge this replacement pack correctly?

Yes, the pack uses the same 6.0V chemistry and a fully decoded chip so the original charging circuit recognises it without modification.

How can I confirm the new pack is delivering its rated 38.4Wh after installation?

Run the lubricator through two or three full charge and discharge cycles; the runtime should then match the 6400mAh capacity printed on the label.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.