Cameron Sino 5200mAh 7.4V Standard Battery for NetScout OneTouch AT Network Assistant
Replacement lithium-ion battery rated 5200 mAh and 7.4 V for NetScout OneTouch AT Network Assistant, measuring 72.84 x 60.14 x 42.80 mm
- Specifications72.84 x 60.14 x 42.80
- Battery Pack72.84 x 60.14 x 42.80
- Battery Capacity5200.00 milliamp_hours
- Battery Voltage7.4 volts
- 5200 mAh capacity powers extended network testing sessions
- 4 V lithium-ion chemistry matches original equipment specifications
- Certified to ISO 9001, RoHS and CE safety standards
- Built-in protection against overcharge, over-discharge and short circuit
- 84 × 60.14 × 42.80 mm form factor fits OneTouch AT platform
Replacement Battery for NetScout OneTouch AT
This 5200mAh lithium-ion pack replaces the original battery in the NetScout OneTouch AT Network Assistant. It matches the 7.4V specification and the 72.84 x 60.14 x 42.80mm form factor so it fits the device without modification. The integrated chip communicates with the hardware exactly like the factory cell. Certified to ISO9001, RoHS and CE standards.
Steady Output During Extended Test Sessions
The 38.48Wh capacity is designed to sustain the analyser through long cable-certification runs rather than short burst measurements. A fully decoded chip manages discharge evenly so voltage remains stable while the unit powers the display, interfaces and measurement engine. Two to three full charge cycles bring the pack to its rated runtime. Overcharge, over-discharge and short-circuit protection prevent damage during continuous operation.
Physical Limits of the Battery Bay
The pack must fit the exact 72.84 x 60.14 x 42.80mm cavity and connect to the existing connector without adapters. Storage above 60°C or 140°F degrades the chemistry permanently. The 216.4g weight is the mass the chassis was engineered to support. No other form factor or voltage will seat correctly in the OneTouch AT platform.
Highlights
- 5200 mAh capacity powers extended network testing sessions
- 4 V lithium-ion chemistry matches original equipment specifications
- Certified to ISO 9001, RoHS and CE safety standards
- Built-in protection against overcharge, over-discharge and short circuit
- 84 × 60.14 × 42.80 mm form factor fits OneTouch AT platform
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DSX Versiv, DSX-5000 CableAnalyzer, Versiv |
| Part Number | 06824T1325, 479-568, MBP-LION |
| Specifications | 72.84 x 60.14 x 42.80 |
| Battery Pack | 72.84 x 60.14 x 42.80 |
| Battery Capacity | 5200.00 milliamp_hours |
| Battery Voltage | 7.4 volts |
Questions about this item
Does the 7.4 V lithium-ion pack run hot during all-day network testing?
The 5200 mAh cell is rated at 38.48 Wh and weighs 216.4 g; normal operation stays within the 60 °C storage limit, and the built-in protection circuit prevents over-voltage and short-circuit heating.
What must I already own for this 5200 mAh replacement to work?
You need a NetScout OneTouch AT Network Assistant or OneTouch AT platform unit that originally used part numbers 06824T1325, 479-568 or MBP-LION, plus the device's original charger.
Will the 72.84 × 60.14 × 42.80 mm pack fit alongside the DSX-5000 CableAnalyzer I still use?
The battery is a direct mechanical match for the OneTouch AT compartment; it does not share a form factor with the DSX Versiv or DSX-5000 analysers, so it cannot be swapped between those platforms.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



