Cameron Sino 5200mAh 11.1V Battery for Trimble S3 S5 S6 S7 SPS610 SPS710 PN 79400 99511-30
5200 mAh 11.1 V lithium-ion replacement battery for Trimble S3, S5, S6, S7, SPS610 and SPS710 total stations
- Specifications126.00 x 74.30 x 25.10
- Typelithium_ion
- Battery Pack126.00 x 74.30 x 25.10
- Battery Typelithium_ion
- Battery Capacity5200.00 milliamp_hours
- Battery Voltage11.10 volts
- 5200 mAh capacity delivers extended field time for Trimble total stations
- 1 V lithium-ion chemistry matches original equipment specifications
- Replacement for part numbers 79400 and 99511-30 across S3 S5 S6 S7 SPS610 SPS710 models
- ISO9001 RoHS CE certified with overcharge over-discharge short-circuit protection
- Compact 126.00 x 74.30 x 25.10 mm form factor fits existing battery compartments
Cameron Sino 5200mAh 11.1V Battery
This lithium-ion battery pack delivers 5200mAh capacity at 11.1 volts for Trimble total stations. It fits S3, S5, S6, S7, SPS610, SPS710 and other models listed under part numbers 79400 and 99511-30. The unit is built to original specifications with a fully decoded chip for direct compatibility.
Replaces original Trimble batteries
It serves as a direct replacement for depleted or ageing OEM packs in supported survey instruments. The upgrade is worthwhile when the original battery no longer holds sufficient charge for a full field day or shows reduced runtime. ISO9001, RoHS and CE certifications confirm manufacturing quality standards.
Simple drop-in installation
The pack matches the original 126.00 x 74.30 x 25.10 mm form factor and connector layout for tool-free fitting. A new battery reaches peak performance after two or three full charge cycles. Ensure the connector seats properly and avoid low-quality third-party chargers to prevent damage.
Highlights
- 5200 mAh capacity delivers extended field time for Trimble total stations
- 1 V lithium-ion chemistry matches original equipment specifications
- Replacement for part numbers 79400 and 99511-30 across S3 S5 S6 S7 SPS610 SPS710 models
- ISO9001 RoHS CE certified with overcharge over-discharge short-circuit protection
- Compact 126.00 x 74.30 x 25.10 mm form factor fits existing battery compartments
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | RTS573 Total Station, RTS633 Total Station, RTS655, RTS655 Total Station, RTS773 Total Station, RTS873, RTS873 Total Station, S3, S3 Total Station, S3 Total Stations, S5, S5 Total Station, S5 Total Stations, S6, S6 Total Station, S6 Total Stations, S7, S7 Total Station, S7 Total Stations, S8, S8 Total Station, S8 Total Stations, S9, S9 HP Total Stations, S9 Total Stations, SPS610 Total Station, SPS620 Total Station, SPS630, SPS700 Total Station, SPS710 Total Station, SPS720 Total Station, SPS730 Total Station, SPS930, SPS930 Total Station, VX, VX Total Station, VX Total Stations |
| Part Number | 79400, 99511-30 |
| Specifications | 126.00 x 74.30 x 25.10 |
| Type | lithium_ion |
| Battery Pack | 126.00 x 74.30 x 25.10 |
| Battery Type | lithium_ion |
| Battery Capacity | 5200.00 milliamp_hours |
| Battery Voltage | 11.10 volts |
Questions about this item
What are the exact dimensions of this 5200mAh 11.1V battery for the Trimble S6 Total Station?
The pack measures 126.00 mm long, 74.30 mm wide and 25.10 mm thick, matching the original Trimble 79400 form factor.
Which step do installers often miss when fitting this battery into an SPS710?
After sliding the pack into the compartment, the connector must be fully seated until it clicks; a loose plug prevents the total station from powering on.
What regular care keeps this lithium-ion pack performing well in a Trimble S5?
Run two or three full charge-discharge cycles on the new pack, then avoid leaving it fully discharged for long periods and store it around half charge.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
