We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cameron Sino 4000mAh Camera Battery for Canon BP-85

SKU CH-53HS-R44J5

Replacement battery for Canon camcorders including GL2, XL1, XL2 and UC-X2 models, delivering 4000mAh at 7.4V with a fully decoded chip

  • Pack70.88 x 38.75 x 38.35
  • Capacity4000.00 milliamp_hours
  • Compatibility4000mAh / 29.60Wh
  • 4000mAh capacity powers extended shoots
  • 60Wh energy rating supports long recording sessions
  • 4V voltage matches original Canon BP-85 specification
  • ISO9001, RoHS and CE certified for safety compliance
  • Fully decoded chip works identically to original battery

Compatible Canon Camcorders

This replacement battery fits a wide range of Canon camcorders including the GL2, XL1, XL1S, XL2, and several ES and UC series models. It matches the original BP-85 part number and uses a fully decoded chip so the camera reports remaining capacity accurately. The pack is built to the same physical dimensions as the OEM unit for a secure fit. No soldering or modification is required for installation.

Sustained Recording Performance

Rated at 4000mAh and 29.60Wh, the cell delivers consistent voltage through long recording sessions rather than fading after a short burst. The 7.4V nominal output remains stable under the continuous current draw of MiniDV and HDV camcorders. Users can expect reliable run-time for event coverage or documentary work without sudden shutdown. The pack reaches its full capacity after two or three complete charge cycles.

Thermal and Safety Behaviour

The battery includes overcharge, over-discharge, over-voltage and short-circuit protection circuits that keep cell temperature within safe limits during normal use. No active cooling is needed and the pack operates silently inside the camcorder body. The supplier advises against storage above 60°C and warns against disassembly or exposure to fire. A shock-absorbing foam insert protects the cells during transport.

Highlights

  • 4000mAh capacity powers extended shoots
  • 60Wh energy rating supports long recording sessions
  • 4V voltage matches original Canon BP-85 specification
  • ISO9001, RoHS and CE certified for safety compliance
  • Fully decoded chip works identically to original battery

Specifications

BrandCameron Sino
ModelAG-BP15P, AG-BP25, AG-EZ1, AG-EZ1U, AG-EZ20, AG-EZ30P, AG-EZ30U, EZ-1P, GA-EZ20, NV-DE3, NV-DJ1, NV-DJ100, NV-DL1, NV-DP1, NV-DR1, NV-DS1, NV-DS100EN, NV-DS1EG, NV-DS1EN, NV-DS5, NV-DS5EG, NV-DS5EN, NV-DX1, NV-DX100, NV-DX100EN, NV-DX110, NV-DX110EG, NV-DX1EN, PV-D1000, PV-DV1000, PV-DV700, PV-DV710, PV-DV950, PV-SD4090, PV-SD5000, ZG-EZ30U
Part NumberCGR-B/403, VW-VBD2, VW-VBD3, VW-VBD5, VW-VBDR1
Pack70.88 x 38.75 x 38.35
Capacity4000.00 milliamp_hours
Compatibility4000mAh / 29.60Wh

Questions about this item

Does the 7.4 V, 4000 mAh lithium-ion pack run warm during a full day of shooting?

The battery is rated at 7.4 V and 4000 mAh (29.60 Wh) with built-in over-charge, over-discharge, over-voltage and short-circuit protection, which limits heat build-up during extended use.

What charger do I need to recharge this BP-85 replacement?

Use the original Canon charger supplied with your camcorder or a compatible 7.4 V lithium-ion charger; the fully decoded chip communicates with the camera exactly like the OEM pack.

Will this pack fit my older Canon XL1S without modification?

Yes — it replaces the Canon BP-85 and matches the 70.88 × 38.75 × 38.35 mm form factor, so it slides into the XL1S battery compartment directly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.