We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cameron Sino 3800mAh 3.7V Battery for 2GIG GC3 Panel

SKU CH-HWQ2-7SDFJ

Replacement lithium-ion battery for 2GIG GC3, GC3e and SP1-GC3 alarm panels, 3800 mAh at 3.7 V with built-in protection circuit

  • Specifications89.10 x 37.50 x 8.00
  • Battery Pack89.10 x 37.50 x 8.00
  • Battery Capacity3800 milliamp_hours
  • Battery Voltage3.7 volts
  • 3800 mAh capacity powers the panel longer
  • 7 V lithium-ion cell matches original voltage
  • 10 x 37.50 x 8.00 mm size fits GC3, GC3e and SP1-GC3
  • ISO 9001, RoHS and CE certified for safety
  • Fully decoded chip works like the original battery

Compatible Replacement Battery

The Cameron Sino battery replaces the original power cell in 2GIG GC3 Panel, GC3e Panel and SP1-GC3 alarm systems. It matches the factory part numbers 10-000014-001 and 823990. Installers can swap the pack without soldering or special tools. The pack uses lithium-ion chemistry and includes a decoded chip for direct communication with the panel.

Capacity and Runtime Headroom

Rated at 3800mAh and 14.06Wh, the cell delivers the same nominal energy as the OEM unit. It supports normal panel operation and backup duty during mains loss. Runtime scales with sensor count, communication activity and siren use; heavy event traffic will deplete the reserve faster. The pack reaches full performance after two or three complete charge cycles.

Voltage and Physical Limits

The pack operates at 3.7 volts and measures 89.10 by 37.50 by 8.00 millimetres. It fits the existing battery compartment without modification. Do not exceed the 60°C storage limit or expose the cell to fire or water. The internal protection circuit guards against overcharge, over-discharge and short circuits, but the panel's charging circuit governs the actual charge profile.

Highlights

  • 3800 mAh capacity powers the panel longer
  • 7 V lithium-ion cell matches original voltage
  • 10 x 37.50 x 8.00 mm size fits GC3, GC3e and SP1-GC3
  • ISO 9001, RoHS and CE certified for safety
  • Fully decoded chip works like the original battery

Specifications

BrandCS Cameron Sino
ModelGC3 Panel, GC3e Panel, SP1-GC3
Part Number10-000014-001, 823990
Specifications89.10 x 37.50 x 8.00
Battery Pack89.10 x 37.50 x 8.00
Battery Capacity3800 milliamp_hours
Battery Voltage3.7 volts

Questions about this item

Will this 3800mAh 3.7V pack fit alongside the original GC3 panel board and connectors?

The replacement measures 89.10 x 37.50 x 8.00 mm and uses the same fully decoded chip, so it seats in the GC3, GC3e or SP1-GC3 chassis without modification.

How can I verify the battery is operating correctly after installation?

After fitting, the panel should power up normally and report the expected voltage; a new pack reaches full capacity after 2 or 3 complete charge-and-discharge cycles.

What comes in the box and do I need any extra parts?

One lithium-ion cell weighing 61.0 g is supplied with shock-absorbing foam; no additional cables, chargers or mounting hardware are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.