Cameron Sino 361-00056-21 750mAh 3.7V battery
Replacement lithium-ion battery for compatible GPS navigators, 750mAh at 3.7V with integrated protection circuit
- Specifications48.20 x 34.00 x 4.60
- Typelithium_ion
- Battery Pack48.20 x 34.00 x 4.60
- Battery Typelithium_ion
- Battery Capacity750.00 milliamp_hours
- Battery Voltage3.70 volts
- Direct replacement for DriveAssist 50 LMT-D and Driveluxe 50 LMTHD GPS units
- 750 mAh lithium-ion cell delivers 2.78 Wh at 3.7 V for reliable runtime
- Compact 48.20 × 34.00 × 4.60 mm form factor fits the original battery bay
- Built-in protection guards against overcharge, over-discharge and short circuits
- Manufactured under ISO 9001, RoHS and CE certification for consistent quality
Direct replacement for Garmin navigators
This Cameron Sino lithium-ion cell matches the original 010-01531-00 specification for the DriveAssist 50 LMT-D, DriveAssist 51 LMTS and Driveluxe 50 LMTHD. It delivers 750mAh at 3.7V in a 48.20 x 34.00 x 4.60mm pack weighing 16g. The fully decoded chip communicates with the device exactly like the factory battery.
Steady output during long routes
The 2.78Wh capacity supports extended navigation sessions without the voltage sag seen in worn-out cells. Overcharge, over-discharge, over-voltage and short-circuit protection circuits maintain stable output throughout each charge cycle. Performance settles to its normal level after two or three full charge and discharge cycles.
Slim pack with factory connector
The thin 4.60mm profile fits the existing battery cavity without forcing the case. A pre-fitted connector plugs straight onto the device board, so no soldering or adapter cables are required. The cell ships in shock-absorbing foam and carries ISO9001, RoHS and CE certification. Builders needing a higher-capacity pack or a different form factor should look elsewhere.
Highlights
- Direct replacement for DriveAssist 50 LMT-D and Driveluxe 50 LMTHD GPS units
- 750 mAh lithium-ion cell delivers 2.78 Wh at 3.7 V for reliable runtime
- Compact 48.20 × 34.00 × 4.60 mm form factor fits the original battery bay
- Built-in protection guards against overcharge, over-discharge and short circuits
- Manufactured under ISO 9001, RoHS and CE certification for consistent quality
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | 010-01531-00, DriveAssist 50 LMT-D, DriveAssist 51 LMTS, DriveAssist 51 LMT-S, Driveluxe 50 LMTHD |
| Part Number | 361-00056-21 |
| Specifications | 48.20 x 34.00 x 4.60 |
| Type | lithium_ion |
| Battery Pack | 48.20 x 34.00 x 4.60 |
| Battery Type | lithium_ion |
| Battery Capacity | 750.00 milliamp_hours |
| Battery Voltage | 3.70 volts |
Questions about this item
Will the 3.7 V lithium-ion cell run hot during continuous GPS navigation?
The 750 mAh pack is designed to the original 3.7 V specification, so heat stays within normal limits for the DriveAssist 50 LMT-D and Driveluxe 50 LMTHD during all-day use.
Which existing connector must my device already have for this replacement to fit?
Your navigator must use the original 010-01531-00 battery connector; the new pack includes a fully decoded chip that matches that interface exactly.
Can the 48.20 x 34.00 x 4.60 mm pack replace the original cell in a DriveAssist 51 LMTS without modification?
Yes, the dimensions and 750 mAh capacity match the factory battery for the DriveAssist 51 LMTS, so it fits the existing compartment directly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Canon 2829A002 72C Macrolite Adapter camera accessory
- EF 20-35 3.5-4.5 US…
- Macrolite adapter t…
STARTECH SDI2HD camera accessory 3G SDI to HDMI converter with SDI loop through 755 ft 230 m
VCOM International Ltd CA451 USB 2.0 Female to PS2 Male remote
- Green



