We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack, dark casing, labelled Cameron Sino C129D3 3400mAh 7.4V

Cameron Sino 3400mAh 7.4V Li-ion Battery C129D3 for FLIR B2 E2 E25 E320 E45 E65

SKU CH-36AA-Z1F5B

A 3400 mAh 7.4 V lithium-ion replacement battery for FLIR B2, E2, E25, E320, E45 and E65 thermal cameras

  • Specifications69.30 x 37.40 x 19.50
  • Typelithium_ion
  • Battery Pack69.30 x 37.40 x 19.50
  • Battery Typelithium_ion
  • Battery Capacity3400.00 milliamp_hours
  • Battery Voltage7.40 volts
  • 3400 mAh capacity extends thermal-camera runtime
  • 4 V lithium-ion chemistry matches original spec
  • Fully decoded chip communicates like the factory pack
  • ISO 9001, RoHS and CE certified for safety
  • Replaces FLIR part numbers 1195106 and T198258

Replacement Battery for FLIR Thermal Cameras

This 3400mAh lithium-ion pack delivers 7.4 volts and 25.16Wh for FLIR B2, E2, E25, E320, E45 and E65 series cameras. It matches the original dimensions and includes a decoded chip for accurate capacity reporting. The unit weighs 112.0g and carries ISO9001, RoHS and CE certification.

Suits owners of listed FLIR models.

Technicians maintaining compatible FLIR thermal imagers can install this pack directly using widely available online guides. Buyers needing a different voltage, capacity or form factor for other camera brands should look elsewhere. The connector must match the original part numbers 1195106 or T198258.

3400mAh capacity at 7.4V decides fit

The 3400mAh rating at 7.4V determines whether this battery meets the runtime requirements of the supported FLIR models. Physical size is 91.40 x 41.80 x 20.20mm. Verify the original part number before purchase to ensure electrical and mechanical compatibility.

Highlights

  • 3400 mAh capacity extends thermal-camera runtime
  • 4 V lithium-ion chemistry matches original spec
  • Fully decoded chip communicates like the factory pack
  • ISO 9001, RoHS and CE certified for safety
  • Replaces FLIR part numbers 1195106 and T198258

Specifications

BrandCameron Sino
ModelBeoPlay A1
Part NumberC129D3
Specifications69.30 x 37.40 x 19.50
Typelithium_ion
Battery Pack69.30 x 37.40 x 19.50
Battery Typelithium_ion
Battery Capacity3400.00 milliamp_hours
Battery Voltage7.40 volts

Questions about this item

How often will the C129D3 battery need to be replaced under normal use?

The 3400mAh 7.4V lithium-ion pack is rated for hundreds of charge cycles; after 2 or 3 full charge and discharge cycles it reaches peak capacity, then gradually loses runtime over years of daily use.

What limit appears first when the camera runs continuously on this battery?

The 25.16Wh capacity sets the runtime ceiling; once the stored energy is depleted the camera shuts down, so sustained thermal imaging sessions are bounded by that watt-hour figure.

Does the battery get hot or draw extra power when the FLIR runs all day?

The pack includes over-voltage, over-discharge and short-circuit protection that limits heat build-up; normal operation stays within the 60°C storage ceiling and the decoded chip manages power draw to match the original specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.