We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack with dark casing and connector端子

Cameron Sino 3400mAh 7.4V Li-ion Battery C129D3 for BeoPlay A1

SKU CH-WESZ-K6ZB6

Replacement lithium-ion battery delivering 3400mAh at 7.4V for FLIR thermal cameras including B2, E2, E25, E320, E45 and E65 models

  • Specifications69.30 x 37.40 x 19.50
  • Typelithium_ion
  • Battery Pack69.30 x 37.40 x 19.50
  • Battery Typelithium_ion
  • Battery Capacity3400.00 milliamp_hours
  • Battery Voltage7.40 volts
  • Extended runtime with 3400mAh 25.16Wh capacity
  • Reliable 7.4V power for FLIR thermal cameras
  • Precise fit replaces part numbers 1195106 1195106-05 T198258
  • Certified safety ISO9001 RoHS CE compliance
  • Built-in protection against overcharge over-discharge short-circuit

Replacement Battery for FLIR Thermal Cameras

This 3400mAh 7.4V lithium-ion pack replaces the original battery in FLIR B2, E2, E25, E320, E45, E65 and ThermaCam series cameras. It matches the OEM part numbers 1195106, 1195106-05 and T198258. The integrated decoded chip communicates with the camera exactly like the factory unit. Professionals maintaining thermal imaging kits can swap it in without firmware issues.

Capacity and Runtime Headroom

Rated at 3400mAh and 25.16Wh, the cell delivers a full day of typical thermal scanning before needing a recharge. Heavy continuous recording or cold-weather operation will drain it faster, so operators on extended shifts should carry a spare. The pack reaches peak capacity after two or three complete charge cycles. It is not suited for devices that require a higher voltage or a different form factor.

Protection Circuit and Packaging

Built-in safeguards guard against overcharge, over-discharge, over-voltage and short circuits, protecting both the battery and the camera electronics. The retail box includes shock-absorbing foam that cushions the cell during transport. No charger, cable or mounting hardware is bundled; the camera’s existing charger is used. Installation videos are available online for first-time users.

Highlights

  • Extended runtime with 3400mAh 25.16Wh capacity
  • Reliable 7.4V power for FLIR thermal cameras
  • Precise fit replaces part numbers 1195106 1195106-05 T198258
  • Certified safety ISO9001 RoHS CE compliance
  • Built-in protection against overcharge over-discharge short-circuit

Specifications

BrandCameron Sino
ModelBeoPlay A1
Part NumberC129D3
Specifications69.30 x 37.40 x 19.50
Typelithium_ion
Battery Pack69.30 x 37.40 x 19.50
Battery Typelithium_ion
Battery Capacity3400.00 milliamp_hours
Battery Voltage7.40 volts

Questions about this item

Will this 7.4 V 3400 mAh pack fit the FLIR E25 I already own?

Yes, the C129D3 is listed as a direct replacement for the FLIR E25 and other ThermaCam models.

How can I verify the battery is working correctly after the first charge?

The built-in decoded chip reports capacity to the camera; run two or three full charge and discharge cycles to reach rated 25.16 Wh performance.

Does the box include a charger or only the 112.0 g battery?

Only the single lithium-ion cell is supplied; a compatible FLIR charger must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.