Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00986163BTC
In stock
Cameron Sino 3200mAh 11.84Wh 3.7V Li-Polymer Battery for LeapPad 31565 Platinum 7" XDi Ultra
Replacement lithium-polymer battery delivers 3200mAh at 3.7V for LeapPad 31565, Platinum 7" and XDi Ultra tablets
- Specifications112.10 x 62.20 x 4.60
- Typelithium_polymer
- Battery Pack112.10 x 62.20 x 4.60
- Battery Typelithium_polymer
- Battery Capacity3200.00 milliamp_hours
- Battery Voltage3.70 volts
- 3200 mAh capacity keeps the LeapPad running longer between charges
- 7 V lithium-polymer chemistry matches the original tablet specifications
- Dimensions 112.10 x 62.20 x 4.60 mm fit the battery bay precisely
- Replaces part numbers 800-10067, MLP4063112 and MP5461110 for direct compatibility
- Built-in protection against overcharge, over-discharge, over-voltage and short circuit
Compatible Replacement Battery
This lithium-polymer replacement battery fits the LeapPad 31565, LeapPad Platinum Kids Learning, Platinum 7" and XDi Ultra tablets. It matches the original part numbers 800-10067, MLP4063112 and MP5461110. Parents and repair technicians can swap the power source without soldering.
Sustained Power Delivery
The 3200mAh cell rated at 3.7 volts supplies 11.84Wh of energy for long learning sessions. A built-in protection circuit guards against overcharge, over-discharge, over-voltage and short circuits during continuous use. Performance stabilises after two or three full charge cycles.
Build Quality and Connector
The pack measures 112.10 x 62.20 x 4.60 millimetres and weighs 62.2 grams, matching the original dimensions for a snug fit. A fully decoded chip communicates with the tablet exactly like the factory battery. Shock-absorbing foam in the packaging protects the cell during transport. Buyers who need a higher-capacity cell or a different voltage will not be served by this model.
Highlights
- 3200 mAh capacity keeps the LeapPad running longer between charges
- 7 V lithium-polymer chemistry matches the original tablet specifications
- Dimensions 112.10 x 62.20 x 4.60 mm fit the battery bay precisely
- Replaces part numbers 800-10067, MLP4063112 and MP5461110 for direct compatibility
- Built-in protection against overcharge, over-discharge, over-voltage and short circuit
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | LeapPad 31565, LeapPad Platinum Kids Learning, Platinum 7", XDi Ultra |
| Part Number | 800-10067, MLP4063112, MP5461110 |
| Specifications | 112.10 x 62.20 x 4.60 |
| Type | lithium_polymer |
| Battery Pack | 112.10 x 62.20 x 4.60 |
| Battery Type | lithium_polymer |
| Battery Capacity | 3200.00 milliamp_hours |
| Battery Voltage | 3.70 volts |
Questions about this item
Does the 3.7 V lithium-polymer cell run hot during a full day of use?
The 3.7 V Li-polymer chemistry and 3200 mAh capacity are designed for the tablet's normal load; no extra heat is expected beyond what the original battery produced.
What must I already own for this battery to work in my LeapPad?
You need a LeapPad 31565, LeapPad Platinum Kids Learning, Platinum 7" or XDi Ultra tablet that uses part number 800-10067, MLP4063112 or MP5461110.
Will the 112.10 × 62.20 × 4.60 mm pack fit alongside the original charging circuit in my older LeapPad?
Yes, the dimensions match the factory battery so the existing connector and charging circuit accept it without modification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
