We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular nickel-zinc camera battery pack, dark grey plastic casing, gold contacts visible

Cameron Sino 2700mAh 3.6V NiZn Battery for Sharp VL Models

SKU CH-JV4T-KHQEE

Nickel-zinc replacement battery delivers 2700 mAh at 3.6 V for compatible Sharp VL camcorders

  • Specifications55.70 x 53.64 x 19.20
  • Typenickel_zinc
  • Battery Pack55.70 x 53.64 x 19.20
  • Battery Typenickel_zinc
  • Battery Capacity2700.00 milliamp_hours
  • Battery Voltage3.60 volts
  • 2700 mAh capacity powers longer shoots
  • 6 V nickel-zinc chemistry matches original specs
  • Fits VL-8, VL-8888, VL-S1H and many more models
  • ISO 9001, RoHS and CE certified for safety
  • Built-in protection guards against over-charge and short circuits

Replacement Battery for Sharp VL Camcorders

This Cameron Sino nickel-zinc pack replaces original Sharp BT-H21 and BT-H22 cells in a long list of VL-series camcorders. It delivers 2700mAh at 3.6V and fits models such as the VL-8, VL-8888, VL-S1H and VL-SW50U. The fully decoded chip communicates with the camera exactly like the factory battery. Builders who need a different voltage or chemistry cannot use this pack.

2700mAh Capacity at 3.6 Volts

The single specification that decides fit is the 2700mAh capacity combined with a 3.6V nominal voltage. These two figures must match the original battery label; a different capacity or voltage will not work in the listed Sharp models. The physical envelope measures 55.70 by 53.64 by 19.20 millimetres and weighs 98.0 grams. Buyers who want more storage or a different form factor should look elsewhere.

Straightforward Drop-In Installation

Installation consists of opening the battery door, removing the old pack and sliding this unit into place until the connector seats. The decoded chip requires no programming, but the pack reaches full performance after two or three complete charge cycles. Common issues are using a low-quality third-party charger, which shortens life, or failing to seat the connector fully. Do not disassemble, expose to fire or store above 60 degrees Celsius.

Highlights

  • 2700 mAh capacity powers longer shoots
  • 6 V nickel-zinc chemistry matches original specs
  • Fits VL-8, VL-8888, VL-S1H and many more models
  • ISO 9001, RoHS and CE certified for safety
  • Built-in protection guards against over-charge and short circuits

Specifications

Brandcameron sino
ModelSharp VL-AH131S VL-AD260U VL-E780 VL-E97E VL-A40U VL-E680U VL-SE20U VL-A111H VL-E660 VL-H800U VL-A10H VL-E630 VL-E77U VL-E610 VL-E750U VL-S1H VL-AH50H VL-E685U VL-E66H VL-AH50
Part NumberSharp BT-H22 BT-H22U BT-H21U BT-H21
Specifications55.70 x 53.64 x 19.20
Typenickel_zinc
Battery Pack55.70 x 53.64 x 19.20
Battery Typenickel_zinc
Battery Capacity2700.00 milliamp_hours
Battery Voltage3.60 volts

Questions about this item

What runtime can I expect from the 2700mAh capacity in my Sharp VL camera?

The 2700mAh rating at 3.6V delivers 9.72Wh, giving typical recording times comparable to the original BT-H21 or BT-H22 packs.

Does the nickel-zinc chemistry require a special charger or voltage setting?

It operates at the same 3.6V as the original NiMH packs, so the camera's built-in charger handles it without any change.

Will the 55.70 x 53.64 x 19.20mm pack fit the battery compartment on a VL-S1H?

Yes, those dimensions match the Sharp BT-H21/BT-H22 form factor used by the VL-S1H and all other listed models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.