We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular nickel-zinc camera battery pack, dark finish, labelled 2700mAh 3.6V

Cameron Sino 2700mAh 3.6V Nickel-Zinc Camera Battery

SKU CH-PAG6-WNK05

Nickel-zinc camera battery delivering 2700 mAh at 3.6 V for compatible Sharp camcorders

  • Specifications55.70 x 53.64 x 19.20
  • Typenickel_zinc
  • Battery Pack55.70 x 53.64 x 19.20
  • Battery Typenickel_zinc
  • Battery Capacity2700.00 milliamp_hours
  • Battery Voltage3.60 volts
  • 2700 mAh capacity powers extended recording sessions
  • 6 V nickel-zinc chemistry matches original Sharp specifications
  • Fits VL-8, VL-8888, VL-S1H and over 20 Sharp camcorder models
  • Certified to ISO 9001, RoHS and CE safety standards
  • Fully decoded chip enables direct replacement without modification

Compatible Sharp Camcorder Battery

The Cameron Sino 2700mAh 3.6V nickel-zinc battery replaces Sharp BT-H21, BT-H21U, BT-H22 and BT-H22U packs. It fits a wide range of Sharp VL-series camcorders including VL-8, VL-8888, VL-S1H, VL-SE10H, VL-SE20U and VL-SW50 models. The 9.72Wh cell is built to original specifications with a fully decoded chip. It is suited for owners of those legacy cameras who need a new power source.

Simple Installation With Protection

The battery slides into the camcorder compartment and connects via the original connector; many users find installation videos online helpful. A built-in circuit provides overcharge, over-discharge, over-voltage and short-circuit protection. The pack ships in shock-absorbing foam to prevent transport damage. Buyers who expect a charger in the box should note that only the battery is supplied.

Verify Model And Part Number First

Before ordering, confirm your camcorder model number matches the supported list and that your original battery carries one of the listed Sharp part numbers. The new cell reaches optimal capacity after two or three full charge cycles. Avoid low-quality third-party chargers as they can reduce service life. Do not disassemble, expose to fire or water, or store above 60°C.

Highlights

  • 2700 mAh capacity powers extended recording sessions
  • 6 V nickel-zinc chemistry matches original Sharp specifications
  • Fits VL-8, VL-8888, VL-S1H and over 20 Sharp camcorder models
  • Certified to ISO 9001, RoHS and CE safety standards
  • Fully decoded chip enables direct replacement without modification

Specifications

Brandcameron sino
ModelSharp VL-AH131S VL-AD260U VL-E780 VL-E97E VL-A40U VL-E680U VL-SE20U VL-A111H VL-E660 VL-H800U VL-A10H VL-E630 VL-E77U VL-E610 VL-E750U
Part NumberSharp BT-H22 BT-H22U BT-H21U BT-H21
Specifications55.70 x 53.64 x 19.20
Typenickel_zinc
Battery Pack55.70 x 53.64 x 19.20
Battery Typenickel_zinc
Battery Capacity2700.00 milliamp_hours
Battery Voltage3.60 volts

Questions about this item

How can I verify the 2700mAh 3.6V battery is working correctly after installing it in my Sharp VL-SE20U?

Insert the battery, charge fully using the original Sharp charger, then record video until the camera indicates low power; the runtime should match the 9.72Wh rating for a healthy pack.

What comes in the package and do I need to buy a charger separately?

The box contains one 55.70 x 53.64 x 19.20 mm nickel-zinc battery with a decoded chip; you must use your existing Sharp charger or a compatible BT-H21/BT-H22 charger, which is not included.

My Sharp camcorder uses a BT-H21U pack — is this 2700mAh version the correct replacement?

Yes, this 3.6V 2700mAh nickel-zinc battery replaces Sharp part numbers BT-H21, BT-H21U, BT-H22 and BT-H22U across the listed VL and VSH models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.