We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular nickel-zinc battery pack with connector, 79 by 62 by 33 millimetres

Cameron Sino 2500mAh 4.8V NiZn battery for Cattron Theimeg LRC/L/M 1BAT-7706-A201

SKU CH-NYE8-NWH88

Nickel-zinc 2500 mAh 4.8 V replacement for Cattron Theimeg LRC-series crane remote controls

  • Battery Typenickel_zinc
  • Battery Capacity2500.00 milliamp_hours
  • Battery Voltage4.80 volts
  • 2500 mAh capacity powers crane remotes longer
  • 8 V nickel-zinc chemistry matches original specs
  • ISO 9001, RoHS and CE certified for safety
  • 30 × 62.00 × 33.10 mm size fits LRC, LRC-L, LRC-M
  • Fully decoded chip works like the original battery

Compatible Crane Remote Battery

This nickel-zinc replacement battery fits Cattron Theimeg LRC, LRC-L and LRC-M crane remote controls. It matches the original 1BAT-7706-A201 and BE023-00122 part numbers. The pack delivers 2500mAh capacity at 4.8 volts for reliable operation.

Thermals Noise Power

Nickel-zinc chemistry runs cool during typical remote-control duty cycles. No active cooling is required and the sealed pack produces no audible noise. The 12.00Wh energy rating supports extended shifts between charges.

Upgrade From Original

This unit replaces a depleted or lost original-equipment battery in the same form factor. The jump is worth it when the original no longer holds a full charge or shows reduced runtime. Buyers needing a different voltage or connector should verify compatibility first.

Highlights

  • 2500 mAh capacity powers crane remotes longer
  • 8 V nickel-zinc chemistry matches original specs
  • ISO 9001, RoHS and CE certified for safety
  • 30 × 62.00 × 33.10 mm size fits LRC, LRC-L, LRC-M
  • Fully decoded chip works like the original battery

Specifications

Battery Typenickel_zinc
Battery Capacity2500.00 milliamp_hours
Battery Voltage4.80 volts

Questions about this item

How do I install this 4.8V NiZn pack in my Cattron Theimeg LRC remote and what step is often missed?

Slide the pack into the battery compartment, then press the connector firmly until it clicks; the step most people miss is fully seating that connector so the decoded chip communicates with the remote.

What maintenance will this 2500mAh battery need over its life?

Run two or three full charge and discharge cycles when new to reach peak capacity, then avoid low-quality third-party chargers and store the pack below 60 °C to preserve the protection circuit.

What limit appears first during a long crane operation with this 12.00Wh pack?

The over-discharge protection will cut power once the cell voltage drops to its safety threshold, ending the run before the pack overheats or exceeds its 175.0 g thermal mass.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.