We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular nickel-zinc battery pack, dark finish, connector on one end

Cameron Sino 2100mAh 7.60V Nickel-Zinc Battery for Clover C401U FLEX

SKU CH-VSM9-40713

Nickel-zinc replacement battery delivers 2100 mAh at 7.60 V for Clover C401U and FLEX payment terminals

  • Specifications87.00 x 58.42 x 7.00
  • Typenickel_zinc
  • Battery Pack87.00 x 58.42 x 7.00
  • Battery Typenickel_zinc
  • Battery Capacity2100.00 milliamp_hours
  • Battery Voltage7.60 volts
  • 2100 mAh nickel-zinc cell powers Clover C401U FLEX terminals longer
  • 60 V output matches original battery specification exactly
  • 00 × 58.42 × 7.00 mm dimensions fit the device bay precisely
  • Built-in protection guards against overcharge, over-discharge and short circuits
  • Replaces part numbers AHA22121001, CA355772HV and MPPCLOYJ4

Replacement Battery for Clover C401U FLEX

This nickel-zinc battery replaces the original power cell in Clover C401U and FLEX payment terminals. It delivers 2100mAh at 7.60V and matches the factory part numbers AHA22121001, CA355772HV and MPPCLOYJ4. The pack measures 87.00 x 58.42 x 7.00mm and weighs 68.0g.

Installation and Common Issues

The battery connects via the terminal's internal connector and online videos show the fitting process. A new pack reaches full performance after two or three complete charge and discharge cycles. Using a low-quality third-party charger can shorten service life, and the connector must be seated firmly during fitting.

Compatibility Check Before Ordering

Verify the device model is Clover C401U or FLEX and confirm the original battery carries one of the listed part numbers. Ensure the terminal's battery compartment accepts the 87.00 x 58.42 x 7.00mm form factor. Do not purchase if your unit uses a different voltage or chemistry.

Highlights

  • 2100 mAh nickel-zinc cell powers Clover C401U FLEX terminals longer
  • 60 V output matches original battery specification exactly
  • 00 × 58.42 × 7.00 mm dimensions fit the device bay precisely
  • Built-in protection guards against overcharge, over-discharge and short circuits
  • Replaces part numbers AHA22121001, CA355772HV and MPPCLOYJ4

Specifications

Brandcameron sino
ModelClover C401U FLEX
Part NumberClover MPPCLOYJ4 AHA22121001 CA355772HV
Specifications87.00 x 58.42 x 7.00
Typenickel_zinc
Battery Pack87.00 x 58.42 x 7.00
Battery Typenickel_zinc
Battery Capacity2100.00 milliamp_hours
Battery Voltage7.60 volts

Questions about this item

How do I confirm the 2100mAh 7.60V battery is working correctly after installation?

The terminal should power on and hold a charge through a full shift; the decoded chip reports capacity to the Clover C401U FLEX so the battery indicator reads accurately.

What comes in the box and what must I source separately?

One nickel-zinc battery pack measuring 87.00 x 58.42 x 7.00 mm weighing 68.0 g is included; no charger, tools or adhesives are supplied.

Which part numbers does this 2100mAh 7.60V version replace?

It replaces Clover part numbers AHA22121001, CA355772HV and MPPCLOYJ4 for the C401U and FLEX terminals.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.