Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00991552BTC
In stock
cameron sino 2100mAh 14.8V Li-Polymer Battery for Carestream DRX-1 450 465 SPAA1531 SPAC1432
A 14.8 V, 2100 mAh lithium-polymer replacement battery for Carestream DRX-1 450 and 465 flat-panel imagers, matching part numbers SPAA1531 and SPAC1432
- Specifications210.00 x 154.20 x 6.80
- Typelithium_polymer
- Battery Pack210.00 x 154.20 x 6.80
- Battery Typelithium_polymer
- Battery Capacity2100.00 milliamp_hours
- Battery Voltage14.80 volts
- 2100 mAh capacity powers extended imaging sessions
- 8 V output matches original equipment requirements
- 00 x 154.20 x 6.80 mm form factor fits DRX-1 flat-panel systems
- ISO9001 RoHS CE certified replacement for part numbers SPAA1531 SPAC1432
- Lithium-polymer chemistry with built-in overcharge over-discharge short-circuit protection
Compatible replacement for Carestream DRX-1 systems
This lithium-polymer battery replaces the original SPAA1531 and SPAC1432 packs used in Carestream DRX-1, DRX-1 System Flat Panel Digital Imager 450 and 465 units. It delivers 2100mAh at 14.8V for 31.08Wh of capacity. The pack measures 210.00 x 154.20 x 6.80mm and weighs 332.5g.
Steady output during extended imaging sessions
The fully decoded chip communicates with the host system exactly like the factory battery, maintaining consistent voltage through long acquisition periods. Built-in protection guards against overcharge, over-discharge, over-voltage and short-circuit events so the pack sustains performance without sudden shutdowns. Each unit undergoes spec detection and use testing before it ships.
Direct swap for ageing or failed original packs
Technicians replacing a depleted OEM battery will find the same connector layout and form factor, so no adapter or firmware update is required. The jump is worth it when the original pack no longer holds a full charge or triggers low-power warnings during clinical use. Buyers who need a different voltage or capacity for another modality should look elsewhere.
Highlights
- 2100 mAh capacity powers extended imaging sessions
- 8 V output matches original equipment requirements
- 00 x 154.20 x 6.80 mm form factor fits DRX-1 flat-panel systems
- ISO9001 RoHS CE certified replacement for part numbers SPAA1531 SPAC1432
- Lithium-polymer chemistry with built-in overcharge over-discharge short-circuit protection
Specifications
| Brand | cameron sino |
|---|---|
| Model | Carestream DRX-1 DRX-1 System Flat Panel Digital Imager 450 DRX-1 System Flat Panel Digital Imager 465 |
| Part Number | Carestream 441400052 8G5132 1001163 SPAC1432 SPAA1531 |
| Specifications | 210.00 x 154.20 x 6.80 |
| Type | lithium_polymer |
| Battery Pack | 210.00 x 154.20 x 6.80 |
| Battery Type | lithium_polymer |
| Battery Capacity | 2100.00 milliamp_hours |
| Battery Voltage | 14.80 volts |
Questions about this item
Does the 14.8 V lithium-polymer pack run hot or draw extra power during a full day of imaging?
The 2100 mAh / 31.08 Wh cell is designed to the original specifications, so heat and power draw match the factory battery under normal use.
What must I already have to install this 2100 mAh battery in my DRX-1 system?
You need the Carestream DRX-1, DRX-1 System Flat Panel Digital Imager 450 or 465 with a compatible battery compartment and connector.
Will this replacement work alongside the original SPAA1531 or SPAC1432 battery I keep as a spare?
Yes, the fully decoded chip makes it interchangeable with the original SPAA1531 and SPAC1432 packs, so both can be used in rotation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
