We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver lithium-ion battery pack 56.10 by 51.00 by 14.50 mm

Cameron Sino 2000mAh 4.8V Battery for Shimpo FGE FGV

SKU CH-CGJE-7PR9C

Replacement 2000mAh 4.8V lithium-ion pack fits Shimpo FGE and FGV force gauges

  • Specifications56.10 x 51.00 x 14.50
  • Battery Pack56.10 x 51.00 x 14.50
  • Battery Capacity2000.00 milliamp_hours
  • Battery Voltage4.8 volts
  • 2000 mAh capacity powers force gauges through extended test sessions
  • 8 V output matches original Shimpo FGE and FGV specifications
  • Replaces multiple part numbers including BFGG0200511 FVE-BAT KRO6AA4 OSA312
  • ISO 9001 RoHS and CE certified for safety and compliance
  • Compact 56.10 x 51.00 x 14.50 mm fits existing battery compartments

Replacement Battery for Shimpo Force Gauges

This 2000mAh lithium-ion pack operates at 4.8 volts and fits Shimpo FGE and FGV series force gauges including the HX, HXY, X and XY variants. It replaces original part numbers BFGG0200511, FVE-BAT, KRO6AA4 and OSA312. The fully decoded chip communicates with the instrument exactly as the factory cell does. Installers can follow widely available online guides for a straightforward swap.

2000mAh Capacity and 9.60Wh Energy Reserve

At 2000 milliampere-hours the pack delivers 9.60 watt-hours, enough for extended measurement sessions in the field or lab. The 56.10 by 51.00 by 14.50 millimetre form factor slides into the existing battery compartment without modification. Runtime ends when the gauge signals low power; the pack does not support hot-swap operation so the instrument must be off during replacement.

Operating Limits and Safety Constraints

Do not store or expose the battery above 60 degrees Celsius or 140 degrees Fahrenheit. The integrated protection circuit guards against overcharge, over-discharge, over-voltage and short-circuit events. Disassembly, immersion in water and disposal in fire are prohibited. A new cell reaches its full capacity after two or three complete charge and discharge cycles.

Highlights

  • 2000 mAh capacity powers force gauges through extended test sessions
  • 8 V output matches original Shimpo FGE and FGV specifications
  • Replaces multiple part numbers including BFGG0200511 FVE-BAT KRO6AA4 OSA312
  • ISO 9001 RoHS and CE certified for safety and compliance
  • Compact 56.10 x 51.00 x 14.50 mm fits existing battery compartments

Specifications

BrandCameron Sino
ModelFGE-HX, FGE-HXY, FGE-X, FGE-XY, FGV-HX, FGV-HXY, FGV-X, FGV-XY, Force Gauges FGE, Force Gauges FGV
Part NumberBFGG0200511, FVE-BAT, KRO6AA4, OSA312
Specifications56.10 x 51.00 x 14.50
Battery Pack56.10 x 51.00 x 14.50
Battery Capacity2000.00 milliamp_hours
Battery Voltage4.8 volts

Questions about this item

Will this 4.8V 2000mAh pack run my Shimpo FGV-HXY force gauge for the same duration as the original FVE-BAT?

Yes, the capacity and voltage match the original specification, so runtime on the FGV-HXY will be equivalent.

How do I confirm the new battery is working correctly after I install it in my FGE-X?

Charge it fully, then run the gauge through 2 or 3 complete charge-discharge cycles; the indicator should show full capacity and stable voltage.

Does the box include a charger or only the lithium-ion battery with the decoded chip?

Only the replacement battery is supplied; a compatible charger must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.