Cameron Sino 2000mAh 12V Nickel-Zinc Battery PN 90584779
Nickel-zinc 12 V 2000 mAh replacement pack for Flexi PD1080 H2, PD1200 H1 and Z-PD1200 vacuums
- Specifications113.00 x 44.00 x 22.80 x 2 pcs
- Typenickel_zinc
- Battery Pack113.00 x 44.00 x 22.80 x 2 pcs
- Battery Typenickel_zinc
- Battery Capacity2000.00 milliamp_hours
- Battery Voltage12.00 volts
- 2000 mAh capacity powers Flexi PD1080 H2 and PD1200 H1 vacuums
- 12 V nickel-zinc chemistry delivers 24 Wh of runtime per charge
- Exact 113 x 44 x 22.8 mm fit replaces original pack without modification
- ISO 9001, RoHS and CE certified with overcharge, over-discharge and short-circuit protection
- Shock-absorbing foam packaging protects the battery during transport
Nickel-Zinc Replacement Battery
The Cameron Sino 2000mAh 12V pack replaces the original power source for Flexi PD1080 H2, PD1200 H1 and Z-PD1200 vacuum cleaners. It delivers 24.00Wh through a fully decoded chip that communicates with the appliance exactly like the factory unit. The two-piece pack measures 113.00 x 44.00 x 22.80mm and weighs 425.0g.
Nickel-Zinc Chemistry Constraints
Nickel-zinc cells operate at a nominal 12.0 volts and must not be charged with low-quality third-party adapters, which can shorten service life. The pack includes overcharge, over-discharge, over-voltage and short-circuit protection, but the chemistry cannot be disassembled, exposed to fire or water, or stored above 60°C. New cells reach peak capacity after two or three complete charge-discharge cycles.
Capacity and Runtime Headroom
At 2000mAh the battery supplies enough energy for typical indoor cleaning sessions on the listed Flexi models. Runtime will fall short for users who need continuous operation beyond a single charge or who run the vacuum at maximum power for extended periods. The 12-month warranty covers defects, but the pack is not suited for devices outside the specified compatibility list.
Highlights
- 2000 mAh capacity powers Flexi PD1080 H2 and PD1200 H1 vacuums
- 12 V nickel-zinc chemistry delivers 24 Wh of runtime per charge
- Exact 113 x 44 x 22.8 mm fit replaces original pack without modification
- ISO 9001, RoHS and CE certified with overcharge, over-discharge and short-circuit protection
- Shock-absorbing foam packaging protects the battery during transport
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Dustbuster Flexi Cyclonic Acti, Flexi PD1080 H2, PD1200 H1, PD1200AV, PD1200B, PD1200-XE, Z-PD1200 |
| Part Number | 90584779 |
| Specifications | 113.00 x 44.00 x 22.80 x 2 pcs |
| Type | nickel_zinc |
| Battery Pack | 113.00 x 44.00 x 22.80 x 2 pcs |
| Battery Type | nickel_zinc |
| Battery Capacity | 2000.00 milliamp_hours |
| Battery Voltage | 12.00 volts |
Questions about this item
Which Flexi vacuum models does the 2000mAh 12V nickel-zinc battery pack replace?
It fits the Flexi PD1080 H2, PD1200 H1, PD1200AV, PD1200B, PD1200-XE and Z-PD1200 models using part number 90584779
What does the 24Wh rating mean for run-time in my Flexi vacuum?
The 24Wh capacity at 12V delivers 2000mAh, matching the original pack so run-time should be the same as when the vacuum was new
Does the nickel-zinc chemistry require a special charger or connector?
No, the pack uses a fully decoded chip and the original connector; charge it with the standard Flexi charger supplied with the vacuum
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



