Cameron Sino 1ICP/18/650 1S1P 2250mAh 3.6V battery
A 3.6 V lithium-ion cell rated at 2250 mAh and 8.10 Wh, measuring 66.00 x 21.80 x 18.50 mm, built for custom battery packs
- Specifications66.00 x 21.80 x 18.50
- Battery Pack66.00 x 21.80 x 18.50
- Battery Capacity2250.00 milliamp_hours
- Battery Voltage3.6 volts
- 2250 mAh capacity extends runtime for custom packs
- 6 V lithium-ion chemistry matches original specifications
- 00 × 21.80 × 18.50 mm form factor fits designated compartments
- ISO9001 RoHS CE certifications confirm regulated manufacturing standards
- Integrated protection guards against overcharge over-discharge and short circuits
Replacement cell for custom packs
This Cameron Sino lithium-ion cell is built as a direct replacement for custom battery packs that specify the 1ICP/18/650 1S1P form factor. It suits technicians and hobbyists who need a single 3.6 V pouch to rebuild or repair a proprietary pack. Buyers who need a different voltage, capacity or physical footprint cannot use this cell.
2250 mAh capacity at 3.6 V
The cell delivers 2250 mAh (8.10 Wh) at a nominal 3.6 volts, matching the original pack specification. That single capacity figure determines whether the rebuilt pack will meet the device's runtime requirements. If the original pack used a higher or lower capacity cell, this unit will not be a correct substitute.
Steady output with protection circuit
A built-in protection circuit guards against over-charge, over-discharge, over-voltage and short-circuit events during extended use. The fully decoded chip communicates with the host device just like the original cell, so the pack maintains stable voltage under continuous load rather than sagging after a brief burst.
Highlights
- 2250 mAh capacity extends runtime for custom packs
- 6 V lithium-ion chemistry matches original specifications
- 00 × 21.80 × 18.50 mm form factor fits designated compartments
- ISO9001 RoHS CE certifications confirm regulated manufacturing standards
- Integrated protection guards against overcharge over-discharge and short circuits
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Battery For Custom Battery Packs |
| Part Number | 1ICP/18/650 1S1P |
| Specifications | 66.00 x 21.80 x 18.50 |
| Battery Pack | 66.00 x 21.80 x 18.50 |
| Battery Capacity | 2250.00 milliamp_hours |
| Battery Voltage | 3.6 volts |
Questions about this item
What does the 2250mAh capacity mean for runtime in a custom pack?
The 2250mAh rating at 3.6V gives 8.10Wh of energy; actual runtime depends on the load your custom pack draws.
What interface or connector standard does this cell use?
The specifications list only dimensions and a decoded chip; no connector type or interface standard is provided.
Will the 66.00 x 21.80 x 18.50mm cell fit my existing battery compartment?
Measure your compartment against 66.00mm length, 21.80mm width and 18.50mm height; the cell weighs 50.0g.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
