AGM Global Vision Fuzion TM25-384 Fusion Thermal Monocular
- Monoculars
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
18 V nickel-zinc replacement battery with 1500 mAh capacity fits DeWalt DC9096 and DE9095 part numbers
This nickel-zinc battery delivers 18.0 V and 1500 mAh capacity for compatible DeWalt power tools. It replaces original part numbers such as DC9096, DE9039, DE9095 and DW9096. The pack measures 136.80 x 88.30 x 113.20 mm and weighs 820 g. A built-in protection circuit guards against overcharge, over-discharge, over-voltage and short circuits.
The 1500 mAh rating suits light to medium tasks such as drilling pilot holes or driving screws in softwood. Under heavy continuous load like large auger bits or sustained cutting the pack will deplete more quickly. Recharging requires a compatible DeWalt charger; the supplier notes that two or three full cycles optimise performance.
Nickel-zinc cells operate at a higher nominal voltage than nickel-cadmium or nickel-metal-hydride packs, so the tool must be designed for this chemistry. The battery must not be stored above 60 °C (140 °F) and should never be disassembled or exposed to fire or water. Using a low-quality third-party charger can shorten service life.
| Brand | Cameron Sino |
|---|---|
| Model | DC020, DC212, DC212B, DC212KA, DC212KB, DC212KZ, DC212N, DC213KB, DC330, DC330K, DC330KA, DC330N, DC380KA, DC380KB, DC380N, DC385, DC385B, DC385K, DC390, DC390B, DC390K, DC390KA, DC390KB, DC390N, DC410, DC410KA, DC410KB, DC410N, DC411B, DC411KA, DC411KL, DC490B, DC490KA, DC495B, DC495KA, DC515B, DC515K, DC515N, DC520KA, DC527 Flash light, DC527 Flashlight, DC530KA, DC545K, DC546K, DC550, DC550B, DC550KA, DC608B, DC608K, DC616K, DC618, DC618K, DC618KA, DC628K, DC668KA, DC720KA, DC721KA, DC721KB, DC725KA, DC725KB, DC729KA, DC759, DC759KA, DC759KB, DC820B, DC820KA, DC820KB, DC821KA, DC8 |
| Part Number | 152250-27, 397745-01, DC9071, DC9096, DC9099, DE9037, DE9039, DE9071, DE9074, DE9075, DE9095, DE9096, DE9501, DE9503, DW9071, DW9072, DW9095, DW9096, DW9098 |
| Specifications | 136.80 x 88.30 x 113.20 |
| Type | nickel_zinc |
| Battery Pack | 136.80 x 88.30 x 113.20 |
| Battery Type | nickel_zinc |
| Battery Capacity | 1500.00 milliamp_hours |
| Battery Voltage | 18.00 volts |
Yes, the pack matches the original DC9096/DE9096 specifications and fits the DW999, DW999K and DW999K2 tool bodies directly.
Run the tool under normal load until it stops; a healthy pack should sustain runtime close to the rated 1500 mAh after two or three full charge-discharge cycles.
Only the battery is supplied; a compatible 18 V NiZn charger must be purchased separately.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?