Cameron Sino 14.4V 7800mAh Battery for RESPIRATOR VG60 VG70
A 14.4V 7800mAh medical replacement battery compatible with RESPIRATOR VG60, VG70 and Lasair II 310, 310B, 350L, 550L models
- Powers VG60 and VG70 respirators reliably with 14.4V 7800mAh capacity
- Fits Lasair II 310, 310B, 350L and 550L particle counters directly
- Meets ISO9001, RoHS and CE standards for medical-grade safety
- Compact 166.95 x 107.10 x 21.10 mm design installs in tight equipment bays
- High-capacity lithium cells deliver extended runtime between charges
Replacement Battery for Ventilators
This Cameron Sino medical battery replaces the original power pack in Respirator VG60 and VG70 units. It also fits Artisan PMS Lasair II 310, 310B, 350L and 550L particle counters. The 14.4V 7800mAh cell restores mobile operation for clinical and cleanroom devices.
Certified Build and Compact Form
The pack measures 166.95 x 107.10 x 21.10mm and carries ISO9001, RoHS and CE certification. Its rigid housing slides into the instrument's battery bay without adapters or cable modifications. Technicians can swap the cell in seconds during routine service intervals.
Voltage and Capacity Match
The 14.4V nominal voltage and 7800mAh capacity must match the equipment's original specification exactly. Units requiring a different voltage or a higher amp-hour rating will not operate correctly with this pack.
Highlights
- Powers VG60 and VG70 respirators reliably with 14.4V 7800mAh capacity
- Fits Lasair II 310, 310B, 350L and 550L particle counters directly
- Meets ISO9001, RoHS and CE standards for medical-grade safety
- Compact 166.95 x 107.10 x 21.10 mm design installs in tight equipment bays
- High-capacity lithium cells deliver extended runtime between charges
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | RESPIRATOR VG60, RESPIRATOR VG70 |
Questions about this item
What voltage does the 14.4V battery deliver to the VG60 and VG70 respirators?
The battery supplies a nominal 14.4V output that matches the original power requirement for the VG60 and VG70 respirator models.
Will the 166.95 x 107.10 x 21.10mm case fit the battery compartment on my Lasair II 350L?
Yes, the pack measures 166.95 mm long, 107.10 mm wide and 21.10 mm thick, matching the factory cavity used in the Lasair II 310, 310B, 350L and 550L.
How do I install the replacement pack without damaging the connector pins?
Power off the device, slide the old pack out along its rails, align the new pack’s keyed connector, press straight in until it clicks, then secure the latch — forcing it at an angle bends the pins.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



