We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-polymer pack 71.00 x 50.50 x 29.80 mm, matte dark finish, wired connector visible

Cameron Sino 12 V 2000 mAh Battery for Argus 606 S Syringe Pump

SKU CH-PJV3-YT0FX

Replacement lithium-polymer pack delivers 12 V and 2000 mAh for Argus 606 S syringe pumps

  • Specifications71.00 x 50.50 x 29.80
  • Typelithium_polymer
  • Battery Pack71.00 x 50.50 x 29.80
  • Battery Typelithium_polymer
  • Battery Capacity2000.00 milliamp_hours
  • Battery Voltage12.00 volts
  • 12 V 2000 mAh capacity powers the Argus 606 S syringe pump through long shifts
  • 0 Wh energy rating matches the original OEM specification for direct replacement
  • 00 × 50.50 × 29.80 mm form factor fits the pump battery compartment exactly
  • Lithium-polymer chemistry with built-in over-charge, over-discharge and short-circuit protection
  • ISO 9001 certified production and 12-month manufacturer warranty back every unit

Compatible Replacement Battery

This 12 V lithium polymer battery replaces the original power pack in the Argus 606 S syringe pump. It matches the 110840-O and 601260 part numbers and delivers 2000 mAh capacity at 24.0 Wh. The pack measures 71.00 x 50.50 x 29.80 mm and weighs 270.0 g. A fully decoded chip allows direct installation without modification.

Upgrade From Depleted Original

The unit is intended for pumps whose factory battery no longer holds a full charge or shows reduced runtime. Swapping it restores the original 2000 mAh capacity and 12.0 V output. The jump is worthwhile when the existing cell drops below usable runtime for clinical shifts. It is not a higher-capacity upgrade and will not extend operating time beyond the pump's original specification.

Lithium Polymer Interface Limits

The battery uses a lithium polymer chemistry rated at 12.00 volts and 2000.00 milliamp hours. It includes overcharge, over-discharge, over-voltage and short-circuit protection circuits. The pack is certified to ISO 9001. Performance stabilises after two or three full charge and discharge cycles. A low-quality third-party charger can shorten service life. The connector must be seated correctly during installation.

Highlights

  • 12 V 2000 mAh capacity powers the Argus 606 S syringe pump through long shifts
  • 0 Wh energy rating matches the original OEM specification for direct replacement
  • 00 × 50.50 × 29.80 mm form factor fits the pump battery compartment exactly
  • Lithium-polymer chemistry with built-in over-charge, over-discharge and short-circuit protection
  • ISO 9001 certified production and 12-month manufacturer warranty back every unit

Specifications

Brandcameron sino
ModelCodan Argus 606 S Syringe Pump Argus infusion pump 606
Part NumberCodan 110840-O 601260
Specifications71.00 x 50.50 x 29.80
Typelithium_polymer
Battery Pack71.00 x 50.50 x 29.80
Battery Typelithium_polymer
Battery Capacity2000.00 milliamp_hours
Battery Voltage12.00 volts

Questions about this item

What are the exact dimensions of this battery pack for the Argus 606 S?

The pack measures 71.00 x 50.50 x 29.80 mm and weighs 270.0 g.

How do I install the battery in the Argus 606 S pump and what step is commonly missed?

Open the battery compartment, insert the pack, and ensure the connector is fully seated; the step often missed is verifying the connector clicks into place.

When should I replace this 2000 mAh lithium-polymer battery in the Argus 606 S?

Replace it when the pump's run-time no longer meets the clinical requirement for a full shift.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.