We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack, flat silver-grey finish, thin profile, connector on one short edge

Cameron Sino 1100mAh Battery for Pocketbook Pro 602/603/612/902/903/912/920

SKU CH-SW1P-SJR3N

Replacement battery for PocketBook Pro e-readers, 1100 mAh at 3.7 V, 65.80 × 53.70 × 4.80 mm, 26.8 g

  • Specifications65.80 x 53.70 x 4.80
  • Battery Pack65.80 x 53.70 x 4.80
  • Battery Capacity1100 milliamp_hours
  • Battery Voltage3.7 volts
  • Ready for Pocketbook Pro 602, 603, 612, 902, 903, 912, 920, 920.W
  • 1100mAh capacity restores original reading time
  • 7V lithium-ion cell matches factory voltage
  • 80 × 53.70 × 4.80mm fits the original bay
  • Built-in protection against overcharge, over-discharge and short circuit

Compatible E-Reader Battery

This replacement battery fits Pocketbook Pro models 602, 603, 612, 902, 903, 912, 920 and 920.W. It delivers 1100mAh capacity at 3.7 volts using lithium-ion chemistry. The pack measures 65.80 x 53.70 x 4.80 mm and weighs 26.8g. A fully decoded chip ensures it works like the original power source.

Replaces Original Pocketbook Pack

It substitutes the original 1ICP4/40/60 1S1P battery when the factory cell no longer holds a useful charge. The upgrade is worth it when reading time drops noticeably or the device shuts down unexpectedly. Matching the part number on the old pack confirms compatibility before purchase.

Steady Output Under Continuous Use

The cell maintains stable voltage during long reading sessions rather than only in short bursts. Built-in protection guards against overcharge, over-discharge, over-voltage and short circuits. ISO9001, RoHS and CE certifications back the safety claims. Performance settles after two or three full charge cycles.

Highlights

  • Ready for Pocketbook Pro 602, 603, 612, 902, 903, 912, 920, 920.W
  • 1100mAh capacity restores original reading time
  • 7V lithium-ion cell matches factory voltage
  • 80 × 53.70 × 4.80mm fits the original bay
  • Built-in protection against overcharge, over-discharge and short circuit

Specifications

BrandCameron Sino
ModelPro 602, Pro 603, Pro 612, Pro 902, Pro 903, Pro 912, Pro 920, Pro 920.W
Part Number1ICP4/40/60 1S1P
Specifications65.80 x 53.70 x 4.80
Battery Pack65.80 x 53.70 x 4.80
Battery Capacity1100 milliamp_hours
Battery Voltage3.7 volts

Questions about this item

What are the exact dimensions of the 1ICP4/40/60 battery?

The battery measures 65.80 mm by 53.70 mm by 4.80 mm and weighs 26.8 g, matching the original Pocketbook Pro 602, 603, 612, 902, 903, 912, 920 and 920.W specifications.

How do I install the replacement battery in my Pocketbook Pro 902?

Open the rear cover, disconnect the original pack, connect the new 3.7 V 1100 mAh cell ensuring the connector seats fully, then reassemble; the pack includes a decoded chip so no further calibration is required.

When should I replace this 1100 mAh lithium-ion cell?

After roughly two to three full charge-discharge cycles the cell reaches peak capacity; plan a replacement when runtime drops noticeably or the e-reader no longer holds a charge through normal reading sessions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.