We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular nickel-zinc battery with silver label

Cameron Sino 1000mAh 3.0V NiZn battery for MicroLogix 1500 SLC-5/00-5/05

SKU CH-KYND-AJDPV

Nickel-zinc 1000mAh 3.0V replacement cell for MicroLogix 1500 and SLC-500 PLCs, measuring 32.50 x 16.40 x 14.80mm

  • Specifications32.50 x 16.40 x 14.80
  • Typenickel_zinc
  • Battery Pack32.50 x 16.40 x 14.80
  • Battery Typenickel_zinc
  • Battery Capacity1000.00 milliamp_hours
  • Battery Voltage3.00 volts
  • Direct replacement for MicroLogix 1500 and SLC-500 PLCs
  • 1000mAh nickel-zinc chemistry delivers reliable backup power
  • 0 V output matches original specification exactly
  • Compact 32.50 x 16.40 x 14.80 mm fits existing battery compartment
  • Built-in protection against overcharge, over-discharge and short circuit

Replacement battery for MicroLogix 1500

This nickel-zinc cell delivers 1000mAh at 3.0V and fits the MicroLogix 1500, SLC-100, SLC-150 and the SLC-5/00 through SLC-5/05 controllers. It is a direct replacement for the original backup battery used in these programmable logic controllers.

Fits existing battery compartments without

The pack measures 32.50 x 16.40 x 14.80mm and weighs 11.0g, matching the original mechanical envelope. A fully decoded chip ensures the PLC recognises the battery immediately, freeing the installer from any firmware updates or jumper changes.

Provides 1000mAh capacity for program-memory backup

The 3.0V nickel-zinc chemistry supplies enough energy to retain ladder logic and data tables during power loss. It is not suited for applications that demand higher capacity or a different voltage, and it cannot be used in controllers outside the listed SLC-500 and MicroLogix 1500 families.

Highlights

  • Direct replacement for MicroLogix 1500 and SLC-500 PLCs
  • 1000mAh nickel-zinc chemistry delivers reliable backup power
  • 0 V output matches original specification exactly
  • Compact 32.50 x 16.40 x 14.80 mm fits existing battery compartment
  • Built-in protection against overcharge, over-discharge and short circuit

Specifications

BrandCameron Sino
ModelMicroLogix 1500, SLC-5/01, SLC5/02, SLC-5/02, SLC5/03, SLC-5/03, SLC5/04, SLC-5/04, SLC5/05, SLC-5/05, SLC500
Specifications32.50 x 16.40 x 14.80
Typenickel_zinc
Battery Pack32.50 x 16.40 x 14.80
Battery Typenickel_zinc
Battery Capacity1000.00 milliamp_hours
Battery Voltage3.00 volts

Questions about this item

How long will the 1000mAh 3.0V NiZn cell keep a MicroLogix 1500 PLC running before it needs replacement?

The 1000mAh capacity at 3.0V is designed to match the original battery life in MicroLogix 1500 and SLC-5/00 through SLC-5/05 controllers; actual runtime depends on the PLC's power draw and operating temperature.

Does the battery generate noticeable heat or require extra cooling when installed in a panel that runs 24/7?

Nickel-zinc chemistry runs cool and the cell weighs only 11.0g, so it adds no measurable heat load inside a continuously operating PLC enclosure.

What must already be in place for this battery to work in my SLC-500 system?

The controller must be a compatible model such as MicroLogix 1500, SLC-100, SLC-150, SLC-5/00, SLC-5/01, SLC-5/02, SLC-5/03, SLC-5/04, SLC-5/05 or SLC-500 with the standard battery compartment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.