Cameron & Co
Cameron & Co standard battery DS-CS-MMR967SL 3.6V 1700mAh Li-MnO2 Green
Lithium manganese dioxide cell delivering 3.6 V and 1700 mAh for Mitsubishi PLC and robot controllers
- TypePower Tool
- Reliable power for Mitsubishi PLCs with 3.6V 1700mAh capacity
- Lithium manganese dioxide chemistry delivers stable 6.12Wh energy
- Compact 38.80 x 18.60 x 16.00 mm fits tight enclosures
- Green casing matches original equipment colour coding
- Non-rechargeable primary cell rated 1.7Ah for long service life
Compatible Mitsubishi PLC Battery
The Cameron & Co DS-CS-MMR967SL is a 3.6V 1700mAh lithium manganese dioxide cell built for Mitsubishi A Series PLCs, A1FX CPU robot controllers and compatible Q and AnS series units. It replaces original part numbers including A6BAT, B9670MC and RH-5AH in industrial automation and robot control equipment.
Non-Rechargeable Primary Cell Limits
This primary Li-MnO2 battery cannot be recharged and must be replaced once depleted. Its 6.12Wh capacity supports memory backup and real-time clock functions in the listed Mitsubishi controllers but provides no power for main system operation.
Direct Drop-In Installation
The green cylindrical cell measures 38.80 x 18.60 x 16.00 mm and fits the original battery compartment without adapters. Installation fails most often when the old cell is left in place too long and leaks, or when polarity is reversed during replacement.
Highlights
- Reliable power for Mitsubishi PLCs with 3.6V 1700mAh capacity
- Lithium manganese dioxide chemistry delivers stable 6.12Wh energy
- Compact 38.80 x 18.60 x 16.00 mm fits tight enclosures
- Green casing matches original equipment colour coding
- Non-rechargeable primary cell rated 1.7Ah for long service life
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-MMR967SL |
| Type | Power Tool |
Questions about this item
Is the DS-CS-MMR967SL sold in any capacity other than 1700 mAh?
The DS-CS-MMR967SL is supplied as a single 1.7 Ah cell; no other capacity versions are offered for this model.
What runtime does 1700 mAh at 3.6 V give in a Mitsubishi A-series PLC?
The cell stores 6.12 Wh, which typically powers the PLC memory backup for several years depending on the CPU current draw.
The battery uses a two-pin connector — does that limit it to the A6BAT pinout only?
The two-pin layout matches the A6BAT and A6BAT-MRBAT pinout, so it fits every Mitsubishi part number listed for this model.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



