We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular rechargeable Ni-MH battery pack, green plastic housing with label and connector

Cameron & Co

Cameron & Co standard battery ACAM0022 9.60V 2000mAh

SKU CH-J0TS-4S0J3

Rechargeable Ni-MH battery powers Bullard T3 and T4 thermal cameras at 9.60V with 2000mAh capacity

  • Rechargeable Ni-MH chemistry delivers stable power for thermal cameras
  • 60 V output matches original specifications for Bullard T3 and T4 series
  • 2000 mAh capacity provides extended runtime during critical operations
  • Direct replacement for OEM part numbers ACAM0022 and BZT3MAX
  • Compatible with multiple Bullard models including T3 Max, T3LT, T3XT, T4, T320T

Thermal Camera Battery

This rechargeable Ni-MH battery powers Bullard T3 and T4 series thermal imaging cameras. It is intended for professionals in firefighting, industrial inspection and emergency response who need a dependable replacement for OEM part numbers ACAM0022, BZT3MAX, T3NI00688 and T3NIMH.

9.60V 2000mAh Capacity

The single specification that decides fit is the 9.60V voltage combined with a 2000mAh / 19.20Wh rating. Only cameras designed for this exact voltage and chemistry will operate correctly, so verify your model appears in the compatible list before purchase.

Sustained Operation

Ni-MH chemistry delivers stable voltage throughout the discharge curve, so the camera maintains consistent thermal imaging performance during long shifts. The pack is built for repeated recharge cycles in demanding environments rather than short bursts, supporting extended missions without sudden voltage sag.

Highlights

  • Rechargeable Ni-MH chemistry delivers stable power for thermal cameras
  • 60 V output matches original specifications for Bullard T3 and T4 series
  • 2000 mAh capacity provides extended runtime during critical operations
  • Direct replacement for OEM part numbers ACAM0022 and BZT3MAX
  • Compatible with multiple Bullard models including T3 Max, T3LT, T3XT, T4, T320T

Specifications

BrandBullard
ModelT3
Part NumberACAM0022

Questions about this item

How long will the 9.60 V 2000 mAh pack run a Bullard T3 thermal camera in the field?

The 19.20 Wh rating gives roughly one to two hours of continuous imaging on a T3 or T4 series camera, depending on display brightness and ambient temperature.

What connector does the ACAM0022 use to mate with the camera body?

It uses the proprietary Bullard T3/T4 battery latch and contact layout shared by part numbers ACAM0022, BZT3MAX and T3NI00688.

Will this pack fit the existing battery compartment on a T3 Max without modification?

Yes, it is a direct mechanical replacement for the OEM Ni-MH pack and locks into the standard T3/T4 cavity with no adapter required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.