We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cameron & Co

Cameron & Co standard battery 14500mAh 7.2V for Seametrics AG2000 iMag4700 XL-205F/2S1P

SKU CH-1W63-5BZEW

Replacement battery for Seametrics AG2000 and iMag4700 flowmeters, 14500mAh at 7.2V with ISO9001, RoHS and CE certification

  • Specifications65.80 x 61.00 x 33.50
  • Battery Pack65.80 x 61.00 x 33.50
  • Battery Capacity14500 milliamp_hours
  • Battery Voltage7.2 volts
  • 14500mAh capacity powers flowmeters for extended field use
  • 2V output matches original Seametrics AG2000 and iMag4700 specifications
  • 80 x 61.00 x 33.50mm form factor fits XL-205F/2S1P battery compartment exactly
  • ISO9001, RoHS and CE certified for safety and regulatory compliance
  • Fully decoded chip communicates with meter electronics like the original battery

Compatible Flowmeter Battery

This 14500mAh 7.2V rechargeable pack replaces the original power source for Seametrics AG2000 and iMag4700 flowmeters. It matches the XL-205F/2S1P part number and carries ISO9001, RoHS and CE certifications. A built-in protection circuit guards against overcharge, over-discharge, over-voltage and short circuits. The fully decoded chip communicates with the meter exactly like the factory unit.

Verify Model And Part Number

Confirm that your device is a Seametrics AG2000 or iMag4700 flowmeter and that the original battery carries part number 100889 or XL-205F/2S1P before ordering. The pack measures 65.80 x 61.00 x 33.50 mm and weighs 228.5 g, so check that the compartment accepts these dimensions. Ensure the connector aligns correctly when you install the new cell. Avoid low-quality third-party chargers, which can reduce service life.

Sustained Field Operation

The 104.40 Wh capacity supports extended logging sessions in continuous-flow monitoring applications. After two or three full charge-discharge cycles the pack reaches its rated runtime. The protection circuitry maintains stable voltage during long deployments without thermal shutdown. Store the battery below 60 °C when not in use to preserve capacity over multiple seasons.

Highlights

  • 14500mAh capacity powers flowmeters for extended field use
  • 2V output matches original Seametrics AG2000 and iMag4700 specifications
  • 80 x 61.00 x 33.50mm form factor fits XL-205F/2S1P battery compartment exactly
  • ISO9001, RoHS and CE certified for safety and regulatory compliance
  • Fully decoded chip communicates with meter electronics like the original battery

Specifications

BrandCameron Sino
ModelBattery For Seametrics
Part Number4894128165217
Specifications65.80 x 61.00 x 33.50
Battery Pack65.80 x 61.00 x 33.50
Battery Capacity14500 milliamp_hours
Battery Voltage7.2 volts

Questions about this item

What comes in the box and do I need to buy a charger separately?

The package contains one rechargeable 14500mAh 7.2V battery with a fully decoded chip. A charger is not included; use the original Seametrics flowmeter or a compatible charger to avoid shortening battery life.

Which part number should I match to ensure this battery fits my device?

Verify your device model and original battery part number against Seametrics 100889 or XL-205F/2S1P. This battery is built for the AG2000 and iMag4700 flowmeters and matches those exact specifications.

What does the 14500mAh capacity mean for runtime in a Seametrics flowmeter?

The 14500mAh (104.40Wh) pack delivers the same capacity as the original battery, so runtime matches factory specifications. Performance reaches its best after two or three full charge and discharge cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.