We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular Li-ion battery pack 154.90 x 69.22 x 26.70 mm for Fluke calibrators

Cameron & Co

Cameron & Co GPS Battery 7.4V 6800mAh 6.8Ah Black

SKU CH-TM60-7GZJ7

Lithium-ion 7.4 V 6800 mAh battery powers Fluke 753, 754, VIP1 and VIP2 calibrators

  • TypeGPS Batteries
  • Powers Fluke 753, 754, VIP1 and VIP2 calibrators
  • Li-ion chemistry delivers 7.4 V and 6.8 Ah capacity
  • 6800 mAh rating supports extended field sessions
  • Slim 154.90 × 69.22 × 26.70 mm profile fits instrument bay
  • Replaces original BP7240 and part 4022220 exactly

Compatible Battery for Fluke 753 and 754 Calibrators

This lithium-ion pack replaces the BP7240 cell in Fluke 753, 754, 754 VIP1 and 754 VIP2 documenting process calibrators. It delivers 7.4V and 6800mAh capacity in a black housing. Technicians who service these specific calibrators can use it as a direct OEM-compatible power source.

Single-Cell Voltage and Form Factor Constraints

The pack operates at a fixed 7.4V nominal voltage, so it cannot power equipment that requires a different cell count or voltage rail. Physical dimensions of 154.90 x 69.22 x 26.70 mm limit installation to the original battery compartment. Users needing higher voltage or a smaller footprint must select a different battery chemistry or form factor.

6.8 Ah Capacity Defines Runtime

The 6.8 Ah rating determines how long the calibrator runs between charges under its specified load. If your field workflow demands longer continuous operation than this capacity provides, this battery will not meet the requirement. Buyers who need extended runtime for multi-day calibration sessions should verify the calibrator's power draw against this 50.32 Wh rating.

Highlights

  • Powers Fluke 753, 754, VIP1 and VIP2 calibrators
  • Li-ion chemistry delivers 7.4 V and 6.8 Ah capacity
  • 6800 mAh rating supports extended field sessions
  • Slim 154.90 × 69.22 × 26.70 mm profile fits instrument bay
  • Replaces original BP7240 and part 4022220 exactly

Specifications

BrandCameron Sino
ModelDS-CS-FBP7240XL
TypeGPS Batteries

Questions about this item

Which capacity should I choose for my Fluke 753 or 754 calibrator?

The 6.8 Ah pack delivers 7.4 V and 50.32 Wh, matching the original BP7240 specification for those models.

What does 6800 mAh mean once the battery is in the calibrator?

It provides 50.32 Wh of energy at 7.4 V, powering the instrument through extended field sessions.

What interface does the pack use and what does it limit?

The pack connects via the Fluke BP7240 battery bay, limiting use to the 753, 754, 754 VIP1 and 754 VIP2 calibrators.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.