Cameron & Co
Cameron & Co DS-CS-WB420MD 6.4V 6000mAh Li-ion battery
Replacement Li-ion battery for Welch-Allyn Spot Vital Signs monitors, 6.4 V 6000 mAh capacity
- TypeHome Electronics Battery
- Compatible with Welch-Allyn Spot Vital Signs monitors
- 4 V 6000 mAh lithium-ion capacity for long run time
- Replaces Welch-Allyn part number 105631 directly
- Compact 111.00 x 79.00 x 59.00 mm black housing
- Brand-new 100 % OEM-compatible unit ready to install
Cameron & Co DS-CS-WB420MD for Welch-Allyn monitors
This lithium-ion replacement battery delivers 6.4 V and 6000 mAh for Welch-Allyn Spot Vital Signs monitors. It matches part number 105631 and fits the 4200B-E1, 420TB-E1, 42M0B-E1, 42MTB-E1, 42N0B-E1 and 42NTB-E1 models. The black pack measures 111.00 x 79.00 x 59.00 mm and weighs 38.40 Wh.
Sustained runtime on clinical carts
The 6 Ah cell maintains steady voltage through a full monitoring shift without the sag seen in aged packs. Internal resistance stays low so the monitor’s alarm and display functions remain responsive until the battery management circuit triggers shutdown. Recharge cycles follow standard lithium-ion profile with no memory effect.
Upgrades depleted OEM packs
This unit replaces an exhausted original battery that no longer holds charge for a complete patient round. It is not for users needing a second hot-swap pack or a higher-capacity chemistry than 6000 mAh. The jump is worth it when the monitor shows reduced uptime or unexpected shutdowns during routine use.
Highlights
- Compatible with Welch-Allyn Spot Vital Signs monitors
- 4 V 6000 mAh lithium-ion capacity for long run time
- Replaces Welch-Allyn part number 105631 directly
- Compact 111.00 x 79.00 x 59.00 mm black housing
- Brand-new 100 % OEM-compatible unit ready to install
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-WB420MD |
| Type | Home Electronics Battery |
Questions about this item
How much heat does the 6.4 V 6000 mAh Li-ion pack generate during continuous use in a Spot Vital Signs monitor?
The battery is a passive component; under normal operation it produces only minimal warmth as it discharges its 38.40 Wh capacity.
Which Welch-Allyn monitors accept the DS-CS-WB420MD so I can confirm my device is supported?
It replaces part 105631 and fits the 4200B-E1, 420TB-E1, 42M0B-E1, 42MTB-E1, 42N0B-E1 and 42NTB-E1 Spot Vital Signs models.
Will the 111.00 x 79.00 x 59.00 mm black pack fit the original battery compartment of a 4200B-E1 without modification?
Yes, the dimensions match the OEM specification for 100 % compatible replacement in the listed Welch-Allyn monitors.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



