Cameron & Co
Cameron & Co DS-CS-VBS20E camera battery Ni-MH 4.8V 2400mAh 11.52Wh black
Ni-MH replacement battery delivers 4.8 V and 2400 mAh for Panasonic NV-A1, NV-X100 and VW-VBS20E models
- TypeBattery
- Ni-MH chemistry delivers reliable power without memory effect
- 8 V 2400 mAh capacity supports extended shooting sessions
- Direct replacement for Panasonic VW-VBS10E and VW-VBS20E packs
- Compact 72.69 x 46.24 x 37.05 mm form factor fits original battery compartments
- Compatible with NV-A1, NV-X100 and Blaupunkt SCR-250 camcorders
Panasonic camcorder battery
This Ni-MH pack delivers 4.8V and 2400mAh for compatible Panasonic camcorders. It replaces the original VW-VBS10E and VW-VBS20E cells and matches the listed part numbers including HHR-V211 and HHR-V212. The black housing fits the NV-A1, NV-X100 and related models. Condition is new.
For owners of listed Panasonic models
Shooters using NV-A1, NV-X100, NV-R100EN or NV-S850EN can swap in this pack directly. It also covers Blaupunkt SCR-250 units that take the VBS20E form factor. Buyers with camcorders requiring a different voltage or connector layout should look elsewhere.
4.8V 2400mAh Ni-MH chemistry
The single deciding figure is the 4.8V 2400mAh rating, which equals 11.52Wh of capacity. Only devices specified for this exact voltage and chemistry will operate correctly. Physical dimensions are 72.69 x 46.24 x 37.05 mm.
Highlights
- Ni-MH chemistry delivers reliable power without memory effect
- 8 V 2400 mAh capacity supports extended shooting sessions
- Direct replacement for Panasonic VW-VBS10E and VW-VBS20E packs
- Compact 72.69 x 46.24 x 37.05 mm form factor fits original battery compartments
- Compatible with NV-A1, NV-X100 and Blaupunkt SCR-250 camcorders
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-VBS20E |
| Type | Battery |
Questions about this item
Which capacity version of the Cameron Sino DS-CS-VBS20E should I choose for my Panasonic camcorder?
This model provides 2400 mAh at 4.8 V, delivering 11.52 Wh of energy — the only capacity offered for this part number.
What does the 11.52 Wh rating mean for actual recording time in my camcorder?
The 11.52 Wh figure is the total energy the pack can store; real recording time depends on the camcorder's power draw, so a device drawing roughly 5 W would run for about two hours on a full charge.
What interface does the battery use and what does it limit in practice?
The pack connects through the Panasonic VW-VBS10E/VBS20E slide-in interface, which mechanically locks the battery and carries the 4.8 V supply; no data or fast-charge negotiation is performed over this connector.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



