Cameron & Co
Cameron & Co DS-CS-STM470AF Li-SOCl2 7.2V 14.5Ah video accessory
Lithium thionyl chloride 7.2 V 14.5 Ah battery powers Seametrics AG2000 and iMag4700 flowmeters
- TypeHome Electronics Battery
- Lithium-thionyl-chloride chemistry delivers stable voltage for flow-meter logging
- 2 V 14.5 Ah capacity powers AG2000 and iMag4700 units through extended deployments
- 40 Wh energy rating supports long-term remote monitoring without frequent swaps
- Compact 65.80 × 61.00 × 33.50 mm housing fits existing instrument enclosures
- Direct replacement for part numbers 100889 and XL-205F/2S1P ensures OEM-compatible fit
Battery for Seametrics Flowmeters
This 7.2V 14.5Ah lithium thionyl chloride battery powers Seametrics AG2000 and iMag4700 flowmeters. It replaces part numbers 100889 and XL-205F/2S1P with a non-rechargeable cell rated at 104.40Wh. The black pack measures 65.80 x 61.00 x 33.50 mm and fits the original equipment compartment. Field technicians needing a direct replacement for deployed meters will find it suitable.
Upgrade from depleted primary cells
When an installed AG2000 or iMag4700 unit shows reduced runtime or voltage sag, this 14500mAh pack restores the original energy capacity. The jump is worth it when the meter must log continuously for long periods without access for frequent swaps. Buyers who need a rechargeable chemistry or a different voltage platform cannot use this item.
Sustained load behaviour
The Li-SOCl2 chemistry delivers a stable voltage plateau throughout most of the discharge curve, supporting the flowmeter electronics under continuous logging demand. Self-discharge remains very low during storage, so spare units hold charge for years. The non-rechargeable design means the pack must be replaced once the 14.5Ah capacity is exhausted.
Highlights
- Lithium-thionyl-chloride chemistry delivers stable voltage for flow-meter logging
- 2 V 14.5 Ah capacity powers AG2000 and iMag4700 units through extended deployments
- 40 Wh energy rating supports long-term remote monitoring without frequent swaps
- Compact 65.80 × 61.00 × 33.50 mm housing fits existing instrument enclosures
- Direct replacement for part numbers 100889 and XL-205F/2S1P ensures OEM-compatible fit
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-STM470AF |
| Type | Home Electronics Battery |
Questions about this item
What are the exact dimensions of the DS-CS-STM470AF battery so I can confirm it fits my Seametrics flowmeter?
The battery measures 65.80 mm by 61.00 mm by 33.50 mm. Verify your device compartment matches these dimensions before ordering.
How do I correctly install this Li-SOCl2 battery in my AG2000 or iMag4700 flowmeter?
Power off the flowmeter, open the battery compartment, align the connector polarity exactly as marked, insert the pack firmly until seated, then close the cover securely.
When will this non-rechargeable 14.5 Ah battery need replacement in a Seametrics flowmeter?
Replacement timing depends on your flowmeter's power draw and reporting interval; monitor the device's low-battery indicator and replace the pack when it signals depletion.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



