Cameron & Co
Cameron & Co DS-CS-SMT700SL 4.2 Ah Li-Polymer battery accessory
Lithium-polymer replacement battery delivers 4.2 Ah capacity for Samsung Galaxy Tab S 8.4 models
- 2 Ah capacity extends tablet runtime
- Li-Polymer chemistry keeps weight low at 3.48 mm thin
- 100 % OEM compatible with Galaxy Tab S 8.4 series
- Replaces EB-BT705FBC and EB-BT705FBE original batteries
- 8 V 4200 mAh rating matches factory specifications
Purpose & audience
The Cameron & Co DS-CS-SMT700SL is a replacement lithium-polymer battery for the Samsung Galaxy Tab S 8.4 series. It fits models including the SM-T700, SM-T705 and SM-T707 families and matches OEM part numbers EB-BT705FBC and EB-BT705FBE. Tablet owners needing a fresh power source for daily use will find it suitable.
Thermals, noise & power
As a sealed battery pack the unit has no moving parts, so it produces no audible noise during operation. Normal discharge generates only modest warmth that the tablet chassis manages without extra cooling. The cell chemistry delivers a nominal 3.8 V and a rated capacity of 4200 mAh, equating to 15.96 Wh of stored energy.
Deciding specification
The critical figure is the 4.2 Ah capacity at 3.8 V, which determines whether the battery can meet the runtime you expect from the original 4200 mAh cell. If your device requires a different voltage or a higher milliampere-hour rating this part will not be the correct match.
Highlights
- 2 Ah capacity extends tablet runtime
- Li-Polymer chemistry keeps weight low at 3.48 mm thin
- 100 % OEM compatible with Galaxy Tab S 8.4 series
- Replaces EB-BT705FBC and EB-BT705FBE original batteries
- 8 V 4200 mAh rating matches factory specifications
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-SMT700SL |
Questions about this item
How do I install the DS-CS-SMT700SL battery in my Galaxy Tab S 8.4, and what step is often missed?
Power off the tablet, remove the back cover, disconnect the old battery connector, fit the 133.04 x 80.86 x 3.48 mm Li-Polymer pack, reconnect the cable securely, then reassemble; the step most people miss is fully seating the connector before closing the case.
What maintenance or replacement will this 4.2 Ah Li-Polymer battery need over time?
No routine maintenance is required; expect to replace the pack once its 4200 mAh capacity drops below usable runtime, typically after several hundred charge cycles.
What limit appears first during sustained use of this 3.8 V 15.96 Wh battery?
The 4.2 Ah capacity is the limiting factor — continuous load will drain the 4200 mAh cell until the tablet shuts down, so runtime is the first constraint you hit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



