We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular Ni-MH battery pack 150.45 x 50.12 x 28.50 mm 7.2V 2000mAh

Cameron & Co

Cameron & Co DS-CS-RBS960BL standard battery 7.2V 2000mAh Ni-MH black

SKU CH-5ANC-B97A0

Ni-MH 7.2V 2000mAh replacement battery compatible with Scanreco, Fassi, Cifa, HMF and Palfinger remote controls including RC400, RC590 and RC960 models

  • TypePower Tool
  • Compatible with Scanreco, Cifa, Fassi, HMF, Palfinger 592 and RC400 models
  • 2V 2000mAh Ni-MH chemistry delivers 14.40Wh for extended runtime
  • Replaces OEM part numbers 13445, 16131, 17162 and RSC7220 directly
  • Compact 150.45 x 50.12 x 28.50 mm form factor fits existing battery bays
  • Brand-new, 100% OEM-compatible unit ready for immediate installation

Compatible replacement battery for Scanreco remote

This 7.2V 2000mAh Ni-MH pack replaces the original power source in Scanreco 590, 592, 790 and 960 transmitters as well as Cifa, Fassi, HMF and Palfinger 592 units. It matches part numbers 13445, 16131, 17162 and RSC7220 so the handset powers on without modification.

Check connector layout and voltage before fitting

Verify that your existing pack shows 7.2V and carries one of the listed part numbers on its label. The replacement measures 150.45 x 50.12 x 28.50 mm, so confirm the battery cavity can accept those dimensions and that the contact orientation lines up with the handset terminals.

Direct swap for depleted Ni-MH cells in the same

The unit restores runtime when the original 2 Ah pack no longer holds charge, avoiding the cost of a new transmitter. It is not suited for lithium-based systems or for models that require a different voltage or connector geometry.

Highlights

  • Compatible with Scanreco, Cifa, Fassi, HMF, Palfinger 592 and RC400 models
  • 2V 2000mAh Ni-MH chemistry delivers 14.40Wh for extended runtime
  • Replaces OEM part numbers 13445, 16131, 17162 and RSC7220 directly
  • Compact 150.45 x 50.12 x 28.50 mm form factor fits existing battery bays
  • Brand-new, 100% OEM-compatible unit ready for immediate installation

Specifications

BrandCameron Sino
ModelDS-CS-RBS960BL
TypePower Tool

Questions about this item

Does the box contain only the DS-CS-RBS960BL battery or does it include a charger?

The package contains one 7.2V 2000mAh Ni-MH battery; a charger is not included and must be purchased separately.

My remote uses part number 16131 — is the DS-CS-RBS960BL the correct replacement?

Yes, this model replaces part numbers 13445, 16131, 17162 and RSC7220 used in Scanreco RC400, RC590 and RC960 systems.

What runtime can I expect from the 14.40 Wh capacity in a Scanreco RC960 transmitter?

The 14.40 Wh rating typically provides several hours of continuous operation in compatible Scanreco remotes, depending on signal strength and display usage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.