Cameron & Co
Cameron & Co DS-CS-PSM250PX 6.0V 3.3 Ah Ni-MH battery
A 6.0V 3.3 Ah Ni-MH replacement battery compatible with Paslode IMCT, IM250 and IM350 series cordless nailers
- 3 Ah capacity delivers extended runtime for nailers
- 0 V Ni-MH chemistry matches original tool voltage
- Fits Paslode IMCT, IM250, IM350 and IM325 models
- Replaces OEM packs 404400 and 404717 directly
- Compact 135.25 x 49.66 x 33.10 mm form factor
Compatible Paslode nailer battery
The Cameron & Co DS-CS-PSM250PX is a 6.0V 3.3 Ah nickel-metal hydride battery built for Paslode cordless nailers. It replaces part numbers 404400, 404717, BCPAS-404717 and BCPAS-404717HC across a wide range of IM series tools. The black pack measures 135.25 x 49.66 x 33.10 mm and delivers 19.8 Wh of capacity. It arrives new and ready for immediate site use.
For Paslode IM series operators
This battery suits professionals running IM200, IM250, IM300, IM325, IM350, IM65 or IMCT models that accept the listed part numbers. It is not for users of other brands or older Paslode platforms that use different voltage or connector layouts. Buyers needing lithium-ion chemistry or higher amp-hour ratings should look at alternative power solutions.
Sustained site performance
Nickel-metal hydride chemistry provides steady current through long framing or finishing sessions without the sharp voltage drop seen in short bursts. The 3.3 Ah rating supports extended run times between charges on compatible chargers. Performance remains consistent across repeated daily cycles typical of professional carpentry work.
Highlights
- 3 Ah capacity delivers extended runtime for nailers
- 0 V Ni-MH chemistry matches original tool voltage
- Fits Paslode IMCT, IM250, IM350 and IM325 models
- Replaces OEM packs 404400 and 404717 directly
- Compact 135.25 x 49.66 x 33.10 mm form factor
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-PSM250PX |
Questions about this item
Which Paslode nailer models will the DS-CS-PSM250PX fit without modification?
The battery fits IM65 F16, IM65A, IM65A-F16, IM200F18, IM250, IM250A, IM250-A, IM250A-F16, IM250-F1611, IM250S, IM300, IM325, IM325/80 CTQ, IM-350, IM350A, IM350ct, IM50 F18, IMCT and B20270.
Will this Ni-MH pack charge in my existing Paslode charger for 404400 or 404717 cells?
Yes, it replaces BCPAS-404717 and BCPAS-404717HC packs and charges in the same Paslode charger used for those part numbers.
How can I confirm the pack is delivering its rated 6.0 V and 3.3 Ah after installation?
Measure open-circuit voltage with a multimeter — it should read near 6.0 V — then fire the tool; consistent driving depth over a full charge cycle indicates the 3.3 Ah capacity is present.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
