We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small yellow rectangular battery with brown connector, 35.43 by 19.34 by 16.65 mm

Cameron & Co

Cameron & Co DS-CS-PLC272SL laptop battery 3.0 V 1.2 Ah Yellow

SKU CH-NQQ2-SN2TF

Non-rechargeable 3.0 V 1.2 Ah Li-MnO2 battery for Panasonic FP10, FP2, FP3 PLCs

  • TypeBattery
  • Li-MnO2 chemistry provides stable 3.0 V output for Panasonic PLCs
  • 2 Ah capacity delivers 3.60 Wh energy for extended runtime
  • Direct replacement for AFP8801 part fits FP10, FP2 and FP3 models
  • Compact 35.43 x 19.34 x 16.65 mm size installs without modification
  • Non-rechargeable primary cell eliminates charging circuitry requirements

Compatible Panasonic PLC battery

This 3.0 V lithium-manganese dioxide cell replaces the CS-PLC272SL and AFP8801 packs used in Panasonic FP10, FP2 and FP3 programmable logic controllers. It delivers 1.2 Ah of primary power for memory backup and real-time clock functions. The yellow housing matches the original equipment colour coding for quick identification.

Verify device and voltage before fitting

Confirm that your PLC unit lists the FP10, FP2 or FP3 series in its documentation and that the existing battery shows 3.0 V and 1200 mAh on its label. This cell is non-rechargeable, so it must not be installed in equipment that attempts a charging cycle. Check the brown connector orientation against the socket to avoid reverse polarity.

Compact Li-MnO2 construction with keyed connector

The battery measures 35.43 x 19.34 x 16.65 mm and fits the standard PLC battery compartment without modification. Its Li-MnO2 chemistry provides stable voltage over a wide temperature range and a low self-discharge rate for long service intervals. The polarised brown connector ensures correct insertion every time, reducing the risk of damage during field replacement.

Highlights

  • Li-MnO2 chemistry provides stable 3.0 V output for Panasonic PLCs
  • 2 Ah capacity delivers 3.60 Wh energy for extended runtime
  • Direct replacement for AFP8801 part fits FP10, FP2 and FP3 models
  • Compact 35.43 x 19.34 x 16.65 mm size installs without modification
  • Non-rechargeable primary cell eliminates charging circuitry requirements

Specifications

BrandCameron Sino
ModelDS-CS-PLC272SL
TypeBattery

Questions about this item

Does the Cameron & Co DS-CS-PLC272SL come with any cables or mounting hardware, or is it just the battery?

The package contains one 3.0 V 1.2 Ah Li-MnO2 battery with a brown connector; no cables, brackets or adapters are included.

Which capacity should I choose for a Panasonic FP2 that originally used part AFP8801?

This model supplies 1.2 Ah at 3.0 V, matching the original AFP8801 specification for the FP2, FP3 and FP10.

What does the 3.60 Wh rating mean for daily runtime in a Panasonic FP10?

At 3.60 Wh the cell typically powers the PLC's memory backup for several years, depending on how often the unit is powered down.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.