We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular Li-MnO2 battery with flat terminals, 69.55 x 38.00 x 28.10 mm

Cameron & Co

Cameron & Co DS-CS-PLC267SL 6.0V 1650mAh Li-MnO2 standard battery

SKU CH-SMWQ-VXR1C

A 6.0 V 1650 mAh lithium-manganese dioxide battery compatible with Mitsubishi MR-J4 PLC systems

  • TypePower Tool
  • 0 V output powers Mitsubishi MR-J4 systems
  • 1650 mAh lithium-manganese dioxide chemistry delivers 9.90 Wh energy
  • 55 × 38.00 × 28.10 mm form fits original battery bay
  • Replaces OEM part numbers 2CR17335A, WK17 and MR-BAT6V1SET
  • Brand-new Cameron Sino cell ensures 100 % compatibility

Replacement battery for Mitsubishi MR-J4 systems

The Cameron & Co DS-CS-PLC267SL is a 6.0V 1650mAh lithium manganese dioxide cell built to replace the original MR-BAT6V1SET pack. It fits Mitsubishi MR-J4 controllers and matches part numbers 2CR17335A and WK17. The black casing measures 69.55 x 38.00 x 28.10 mm.

Steady voltage through long shifts

Li-MnO2 chemistry holds a stable 6.0 V output across the full 9.90 Wh capacity, so the controller keeps its memory and clock running without the voltage sag seen in short bursts. The 1.65 Ah rating supports extended backup periods between charges. Self-discharge stays low during storage.

Direct swap, no soldering

The pack drops into the MR-J4 battery slot using the original connector, so installation takes seconds. The only common issue is forgetting to dispose of the old cell properly — lithium manganese dioxide must go to a battery recycling point, not general waste. Polarity is keyed to prevent reverse insertion.

Highlights

  • 0 V output powers Mitsubishi MR-J4 systems
  • 1650 mAh lithium-manganese dioxide chemistry delivers 9.90 Wh energy
  • 55 × 38.00 × 28.10 mm form fits original battery bay
  • Replaces OEM part numbers 2CR17335A, WK17 and MR-BAT6V1SET
  • Brand-new Cameron Sino cell ensures 100 % compatibility

Specifications

BrandCameron Sino
ModelDS-CS-PLC267SL
TypePower Tool

Questions about this item

Does the 6.0 V Li-MnO2 chemistry generate noticeable heat during continuous use in a Mitsubishi MR-J4?

The Li-MnO2 chemistry is designed for stable low-self-discharge operation; it does not produce significant heat during normal continuous duty in the MR-J4.

What existing Mitsubishi hardware must I already have for this DS-CS-PLC267SL to function?

It replaces the original 2CR17335A WK17 or MR-BAT6V1SET pack inside a Mitsubishi MR-J4 PLC, so that controller must be present.

Will the 69.55 x 38.00 x 28.10 mm form factor fit the same battery compartment as the older WK17 cell?

Yes, the dimensions match the WK17 / MR-BAT6V1SET footprint, so it slides into the existing MR-J4 battery slot without modification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.