We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular lithium-ion battery pack with smooth finish and rounded edges

Cameron & Co

Cameron & Co DS-CS-PHV600MX video accessory 14.4V 17000mAh White

SKU CH-9FZR-GJPPX

A 14.4V 17000mAh lithium-ion battery compatible with Philips V60 and V60S ventilators

  • TypeHome Electronics Battery
  • 4 V 17000 mAh capacity powers extended ventilation sessions
  • Li-ion chemistry delivers reliable energy for Philips V60 and V60S units
  • White housing matches original equipment appearance
  • 00 x 73.86 x 49.65 mm form factor fits the device battery bay
  • Replaces OEM part numbers including 1076374 and 88881344

Cameron Sino DS-CS-PHV600MX Battery

The Cameron Sino DS-CS-PHV600MX is a 14.4 V 17000 mAh lithium-ion battery built for Philips V60 and V60S ventilators. It replaces original part numbers including 1056921, 1058272, 1076374 and 107674. The pack delivers 244.80 Wh of capacity in a white housing. It is intended for clinical and home-care staff who need a direct replacement power source.

Installation and common issues

The battery fits into the ventilator’s dedicated compartment without tools; align the contacts and press until the latch clicks. A frequent error is inserting the pack upside-down, which prevents the connector from mating. Dust or residue on the gold contacts can cause intermittent power, so wipe them with a dry lint-free cloth before fitting. The unit ships new and at storage charge; run a full charge cycle before first clinical use.

Who this suits and who should look elsewhere

This pack suits biomedical technicians and home-care providers maintaining Philips V60 or V60S devices that require a 14.4 V lithium-ion module. It is not suitable for users needing a different voltage, a higher capacity than 17 Ah, or a battery for other ventilator models. Buyers who require hot-swap capability without shutting down the device should verify that their specific ventilator firmware supports it.

Highlights

  • 4 V 17000 mAh capacity powers extended ventilation sessions
  • Li-ion chemistry delivers reliable energy for Philips V60 and V60S units
  • White housing matches original equipment appearance
  • 00 x 73.86 x 49.65 mm form factor fits the device battery bay
  • Replaces OEM part numbers including 1076374 and 88881344

Specifications

BrandCameron Sino
ModelDS-CS-PHV600MX
TypeHome Electronics Battery

Questions about this item

How can I confirm the 14.4 V 17000 mAh battery is charging and powering the Philips V60 or V60S after installation?

Insert the battery into the ventilator and check the on-screen power indicator; it should display the charge level and show external power disconnected while the unit runs on the 244.80 Wh pack.

What comes in the box with the white Cameron Sino DS-CS-PHV600MX and what extra items are required?

The package contains one 14.4 V 17 Ah lithium-ion battery measuring 195.00 x 73.86 x 49.65 mm; the ventilator’s own charger and mounting hardware are used, so no additional accessories are needed.

Which capacity version of this battery should I choose for the Philips Respironics V60 and V60S?

Select the 17000 mAh 14.4 V model (part numbers 1076374, 107674, 88881344, 989805626941, M48385-B0, 1056921, 1058272) — it is the only capacity listed for these devices.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.