We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular Ni-MH battery pack 149 by 89 by 20.6 mm

Cameron & Co

Cameron & Co DS-CS-PHM200MD 12.0V 4000mAh Ni-MH battery

SKU CH-7E93-EYMTX

Ni-MH battery powers Philips M2, M3, M4 and Viridia monitors, 12.0V 4000mAh 48.00Wh, black

  • TypeHome Electronics Battery
  • Ready for Philips M2, M3 and M4 monitors
  • 0 V 4000 mAh Ni-MH chemistry delivers 48.00 Wh
  • Replaces OEM part numbers M3046A, M3056, NJ1020AVP, NJ1020HP
  • Compact 149.00 × 89.00 × 20.60 mm black housing
  • Brand-new 100 % OEM-compatible unit

Direct Replacement for Philips Monitors

This Cameron & Co DS-CS-PHM200MD Ni-MH battery is built for Philips M2, M3, M3000A, M3015A, M3016A and M4 patient monitors. It matches the original DR36AAS, M3046A, M3056, NJ1020AVP, NJ1020HP and OM11180-IE part numbers. Clinical teams needing a drop-in power source for these specific units will find it fits without modification.

12.0 V 4000 mAh Ni-MH Performance

The pack delivers 12.0 V and 4000 mAh for a total of 48.00 Wh using nickel-metal-hydride chemistry. Ni-MH cells maintain steady voltage through a discharge cycle and tolerate the frequent charge-discharge patterns common in monitoring stations. Normal operation stays within the thermal envelope of the original equipment without added cooling.

Upgrade from Depleted OEM Packs

Replaces an exhausted factory battery that no longer holds enough charge for transport or backup scenarios. The jump is worth it when runtime has fallen below the length of a typical patient move or when the monitor flags a capacity error. Buyers who need a different voltage, a lithium chemistry or a higher capacity for other devices should look elsewhere.

Highlights

  • Ready for Philips M2, M3 and M4 monitors
  • 0 V 4000 mAh Ni-MH chemistry delivers 48.00 Wh
  • Replaces OEM part numbers M3046A, M3056, NJ1020AVP, NJ1020HP
  • Compact 149.00 × 89.00 × 20.60 mm black housing
  • Brand-new 100 % OEM-compatible unit

Specifications

BrandCameron Sino
ModelDS-CS-PHM200MD
TypeHome Electronics Battery

Questions about this item

How do I install the DS-CS-PHM200MD in a Philips M3000A, and what step is often missed?

Slide the pack into the monitor's battery compartment until the latch clicks; the step often missed is ensuring the polarity markers on the pack align with the compartment before pressing it home.

What maintenance or replacement will the 12.0V 4000mAh Ni-MH pack need over time?

Ni-MH cells self-discharge; charge the pack every few months during storage and replace it when run-time drops below half of the original 48.00 Wh capacity.

What limit appears first when the DS-CS-PHM200MD runs continuously in a Philips M3 monitor?

The 4000 mAh capacity sets the runtime ceiling; under sustained load the pack will deplete after delivering its rated 48.00 Wh before any thermal or voltage cutoff is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.