We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular lithium-ion battery pack measuring 167 by 107 by 21 millimetres

Cameron & Co

Cameron & Co DS-CS-PHD202MD 14.4V 7800mAh Li-ion Battery video accessory

SKU CH-RYDX-GAPHG

14.4 V 7800 mAh lithium-ion battery powers Philips EverGo, Respironics SimplyGo, Siemens ACUSON P300, Hamilton C2/C3 and Esaote MyLab ultrasound systems

  • TypeHome Electronics Battery
  • 4 V 7.8 Ah lithium-ion chemistry powers demanding medical devices
  • 32 Wh capacity supports extended run-time for portable ventilators and ultrasound units
  • 167 × 107 × 21 mm form factor fits original battery compartments without modification
  • Replaces Philips 453561490851 and Inspired Energy NI2024 series part numbers
  • Compatible with Hamilton C2, C3, MAQUET Servo Air and Aeonmed VG60, VG70 respirators

Cameron & Co DS-CS-PHD202MD 14.4V 7800mAh Li-ion

This Cameron & Co DS-CS-PHD202MD is a 14.4V 7800mAh lithium-ion battery built for portable medical and video equipment. It replaces original packs in Philips EverGo 900-12 and Respironics SimplyGo oxygen concentrators, Siemens ACUSON P300 ultrasound systems, Hamilton C2 and C3 ventilators, and Esaote MyLab series scanners. The 112.32Wh capacity suits mobile clinical and field-video workflows where mains power is unavailable.

Check voltage, capacity

Verify that your device accepts a 14.4V 7800mAh pack and that the original part number appears in the compatibility list such as 453561490851, 453561731921C, 453561731922D, RRC2024 or NI2024 variants. Confirm the physical envelope of 167.00 x 107.10 x 21.00 mm fits the battery bay and that the connector polarity aligns with the host equipment. This unit is not for devices requiring a different voltage, a higher capacity or a proprietary communication protocol not supported by this replacement.

Steady output over long shifts rather than brief

The 7.8Ah lithium-ion chemistry delivers consistent voltage across extended operating periods typical of ventilator or portable ultrasound use. Internal cell balancing supports stable discharge from full charge down to the equipment cutoff without the voltage sag seen in short-burst high-drain scenarios. The pack is designed for repeated full-cycle operation in clinical and mobile-video environments where runtime predictability matters more than peak current spikes.

Highlights

  • 4 V 7.8 Ah lithium-ion chemistry powers demanding medical devices
  • 32 Wh capacity supports extended run-time for portable ventilators and ultrasound units
  • 167 × 107 × 21 mm form factor fits original battery compartments without modification
  • Replaces Philips 453561490851 and Inspired Energy NI2024 series part numbers
  • Compatible with Hamilton C2, C3, MAQUET Servo Air and Aeonmed VG60, VG70 respirators

Specifications

BrandCameron Sino
ModelDS-CS-PHD202MD
TypeHome Electronics Battery

Questions about this item

What comes in the box with the Cameron & Co DS-CS-PHD202MD battery?

The box contains the 14.4V 7800mAh Li-ion battery unit measuring 167.00 x 107.10 x 21.00 mm. No cables, chargers or mounting hardware are included.

Which capacity version of this battery should I choose for my device?

This model is supplied in a single 7.8 Ah / 112.32 Wh configuration. Match the original part number such as 453561490851 or RRC2024 to confirm compatibility.

What does the 112.32 Wh rating mean for runtime in a ventilator?

The 112.32 Wh capacity indicates the total energy stored; actual runtime depends on the specific device power draw and operating settings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.