Cameron & Co
Cameron & Co DS-CS-PDL100SL 6.0V 5500mAh Alkaline Battery
6.0 V 5500 mAh alkaline battery powers compatible panic-door locks including BP6, DL-10 and HTL-10 models
- TypeHome Electronics Battery
- Powers panic-door locks reliably with alkaline chemistry
- 0 V 5500 mAh capacity delivers 33.00 Wh runtime
- Fits BP6 815407029 BP-6 DL-10 HTL-10 PG10 models
- Compact 51.60 x 51.60 x 51.00 mm size installs easily
- Non-rechargeable 5.5 Ah cell provides dependable single-use power
Purpose-built alarm power
The Cameron & Co DS-CS-PDL100SL is a 6.0 V alkaline cell rated at 5500 mAh. It is intended for Panic Door locks such as the BP6, DL-10, HTL-10 and PG10 models. Installers fitting these specific devices will find a direct replacement.
Sustained delivery
Alkaline chemistry provides a steady voltage curve during the long standby periods typical of door-lock operation. The 33.00 Wh capacity supports extended service intervals before replacement is required. Non-rechargeable construction means the cell is swapped once depleted.
Form-factor constraint
Physical dimensions are 51.60 x 51.60 x 51.00 mm, so the battery fits only compartments designed for this exact footprint. Builders needing a different voltage, a rechargeable pack or a smaller profile must select another part.
Highlights
- Powers panic-door locks reliably with alkaline chemistry
- 0 V 5500 mAh capacity delivers 33.00 Wh runtime
- Fits BP6 815407029 BP-6 DL-10 HTL-10 PG10 models
- Compact 51.60 x 51.60 x 51.00 mm size installs easily
- Non-rechargeable 5.5 Ah cell provides dependable single-use power
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-PDL100SL |
| Type | Home Electronics Battery |
Questions about this item
Does the 6.0 V 5500 mAh alkaline cell generate noticeable heat during continuous panic-door operation?
Alkaline chemistry at this capacity runs cool under the low, steady draw of a panic-door lock; no active cooling is needed.
What existing hardware must be present for this DS-CS-PDL100SL to power the lock?
A compatible panic-door mechanism such as the BP6, DL-10, HTL-10 or PG10 that accepts a 6.0 V alkaline pack measuring 51.60 x 51.60 x 51.00 mm.
Will this 33.00 Wh replacement work in an older BP6 unit that previously used the 815407029 or BP-6 part numbers?
Yes — the cell matches the original 6.0 V 5.5 Ah specification and fits the same 51.60 mm cube footprint used by those legacy part numbers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



