Cameron & Co
Cameron & Co DS-CS-PCT200SL Battery for Phonak ComPilot II 3.7V 300mAh
Replacement lithium-polymer battery for Phonak ComPilot and ComPilot II wireless headsets, 3.7V 300mAh capacity
- Compatible with Phonak ComPilot and ComPilot II devices
- 7 V 300 mAh lithium-polymer cell delivers 1.11 Wh energy
- Slim 36.80 x 24.50 x 4.60 mm profile fits original battery bay
- Brand-new Cameron Sino unit built to 100 % OEM compatibility
- Replaces OEM part number IP462539 for direct drop-in installation
Replacement Battery for Phonak ComPilot II
This lithium-polymer pack is built to fit the Phonak ComPilot and ComPilot II wireless headsets. It delivers a nominal 3.7 V and 300 mAh capacity, matching the original IP462539 cell. The black housing measures 36.80 x 24.50 x 4.60 mm. Supplied new and 100 % OEM compatible.
Compatibility Check Before Ordering
Confirm that your headset is a Phonak ComPilot or ComPilot II and that the existing battery carries the part number IP462539. Verify the connector orientation and the available space inside the battery compartment against the listed dimensions. This pack is not intended for other hearing-assistance or streaming devices.
Thermals, Noise and Power Draw
As a passive battery cell it generates no audible noise and draws no power while installed. Normal operation stays within the 1.11 Wh energy rating. The Li-Polymer chemistry runs cool during typical streaming use. No active cooling or extra clearance is required.
Highlights
- Compatible with Phonak ComPilot and ComPilot II devices
- 7 V 300 mAh lithium-polymer cell delivers 1.11 Wh energy
- Slim 36.80 x 24.50 x 4.60 mm profile fits original battery bay
- Brand-new Cameron Sino unit built to 100 % OEM compatibility
- Replaces OEM part number IP462539 for direct drop-in installation
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-PCT200SL |
Questions about this item
Does the DS-CS-PCT200SL battery arrive as a single unit or do I need to buy any extra cables or tools to fit it?
The pack contains one 3.7V 300mAh Li-Polymer cell in black; no cables, screws or tools are included, so have a small screwdriver ready for the ComPilot II case.
The listing shows 300mAh and 1.11Wh — which figure should I use to match the original IP462539 part?
Both numbers describe the same cell: 300mAh at 3.7V equals 1.11Wh, so either value confirms compatibility with the IP462539 battery used in ComPilot and ComPilot II.
Will the 36.80 x 24.50 x 4.60 mm dimensions fit the battery compartment of my ComPilot II without modification?
Yes, those are the exact measurements of the original IP462539 pack, so the DS-CS-PCT200SL slots straight into the ComPilot II cavity with no trimming required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
BFKK Hecate G1000 Black speaker 10W Bluetooth 5.3 12 RGB 2.5in 3.5mm
- Black



