Cameron & Co
Cameron & Co DS-CS-MKT620PW 9.6V 1.5Ah Ni-MH Battery
A 9.6V 1.5Ah Ni-MH replacement battery compatible with numerous Makita cordless tools and original part numbers
- Ready for Makita drills with 9.6 V 1.5 Ah Ni-MH power
- Replaces original 192019-4 and 9100 series packs without modification
- Fits over 50 Makita models including 6200D and 6400D
- Delivers 14.4 Wh capacity for extended runtime on site
- Compact red-grey housing measures 88.03 x 57.38 x 99.39 mm
Replacement for Makita 9.6V tools
This Cameron Sino Ni-MH pack replaces original Makita part numbers 192019-4, 192321-5, 192404-1, 192534-8, 192534-A and 192535-6. It fits the 6200D, 6400D, 6702D and dozens of other listed models including the 6014DW, 6201DW, 6221D, 6703D, 6704D, 6705D, 6706D, 6791D, 6792DW, 6793D, 6794D, 6796D, 6797D, 6798D, 6901D, 6903VD, 6907DWE, 6940D, ML901 flashlight and T-series drills.
1.5Ah capacity and runtime
The 1500mAh cell delivers 14.4Wh at 9.6V, giving typical cordless drill and driver runtime for light to medium tasks such as pilot holes, furniture assembly and occasional decking screws. Under continuous high-torque load the pack will deplete noticeably faster and may need a mid-job swap. It is not suited for all-day heavy drilling or large auger bits where sustained current draw exceeds what a 1.5Ah Ni-MH chemistry can maintain.
Ni-MH chemistry limits
Nickel-metal hydride chemistry self-discharges over weeks of storage, so the pack should be topped up before a job if it has sat idle. It lacks the energy density of lithium-ion, meaning more weight per watt-hour and a voltage curve that drops steadily under load rather than holding flat. The chemistry also dislikes deep discharge; running the tool until it stops can shorten overall cycle life.
Highlights
- Ready for Makita drills with 9.6 V 1.5 Ah Ni-MH power
- Replaces original 192019-4 and 9100 series packs without modification
- Fits over 50 Makita models including 6200D and 6400D
- Delivers 14.4 Wh capacity for extended runtime on site
- Compact red-grey housing measures 88.03 x 57.38 x 99.39 mm
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-MKT620PW |
Questions about this item
Will the DS-CS-MKT620PW fit my older Makita 6200D drill?
Yes, the battery is listed as compatible with the 6200D and 6200DW models, replacing original part numbers 192019-4 and 192321-5.
How can I verify the 9.6V 1.5Ah pack is working after I install it?
The tool should start immediately and deliver full speed; a healthy Ni-MH pack holds the 14.4 Wh rating through a normal work session without voltage sag.
Does the red and grey DS-CS-MKT620PW come with a charger or just the battery?
Only the 9.6 V 1500 mAh Ni-MH battery is supplied; a compatible Makita 9.6 V charger must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
